Comparative Study of Small Electrical Machines With Soft Magnetic Composite Cores
نویسندگان
چکیده
منابع مشابه
Application of Soft Magnetic Composite Materials in Electrical Machines: A Review
Soft magnetic composite (SMC) materials and their application in electrical machines have undergone significant development in the past decade. The major advantages of the materials include isotropic magnetic and thermal properties, very low eddy current loss and relatively low total core loss at medium and higher frequencies, and nearly net-shape low cost fabrication process with good toleranc...
متن کاملA Comparative Study of Insulators on Magnetic Properties of Sendust Based Nanocomposite Powder Cores
In this study, Sendust (Fe85Si9.6Al5.4) nanostructure alloy was prepared bymechanical alloying and was characterized by X-ray diffraction. In addition, the alloy’smorphology and its distribution particle size were investigated by scanning electronmicroscopy method. The alloyed powders were insulated with 4wt% of three differentinsulating materials including polyvinyl alc...
متن کاملAn Electrical Circuit Model for Magnetic Cores
In Figure 2, the shape is the same as Fig. I, but the axis labels and values have been changed. Figure 2 shows the characteristic of a specific core made from the material of Figure I. The flux density axis Magnetic Fundamentals: Units commonly used in magnetics design are given in Table I, along with conversion factors from the older CGS system to the SI system (sysfeme infernationalrationaliz...
متن کاملMagnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites
In this work, nanocrystalline Fe85Si10Ni5 soft magnetic powders were prepared by mechanical alloying and subsequent annealing to reduce the internal stresses and lattice strains. The powders were mixed with phenolic resin and warm pressed to produce nanostructured soft magnetic composites. The effect of annealing time and temperature on the crystalline structure, microstructure and magnetic pro...
متن کاملSoft Magnetic Composites Used for the Iron Core of the Electrical Machines
The electrical machines had a lot of benefits upon the developments made in the last years in the powder material industry. This statement is well proven by the coming out in the last two decades of the transverse flux machines (TFM). The iron core of most of these machines is built of soft magnetic composite (SMC), which allows three-dimensional flux paths. In this paper measurements of a SMC ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Industrial Electronics
سال: 2017
ISSN: 0278-0046,1557-9948
DOI: 10.1109/tie.2016.2583409