COMPARATIVE MECHANICAL PROPERTIES STUDIES ON HEAT & UNHEAT TREATED AL7075 ALLOY HYBRID COMPOSITES (IN PRESS)
نویسندگان
چکیده
منابع مشابه
Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites
In the current research work synthesis, characterization, mechanical and wear behavior of 5 and 10 wt. % of nano TiO2 particulates reinforced Al7075 alloy composites are inspected. The Al7075 alloy and nano TiO2 particle composites were provided by melt stir system. After the preparation, the prepared composites were analyzed by SEM, EDS, and XRD for inquiring the microstr...
متن کاملA Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment
In this article, microstructural characteristics and mechanical properties of Al-Si-Cu/NCP composites were evaluated. Reinforced nanocomposites with 1 wt% nano-clay were fabricated by the method of the stir casting. Stirring times and temperatures were variable parameters to produce specimens. Consequently, the effect of a T6 heat treatment, which contained solutioning at 490 ºC for ...
متن کاملMechanical properties of La-based bulk amorphous alloy and composites
Influence of different microstructure of La-based fully amorphous samples and its composites on the impact fracture energy were investigated and discussed. Results showed improvement in fracture energy of glassy metals with the presence intermetallic phases, but deteriorated in the presence of dendrite phases and high volume % of crystalline phases.
متن کاملSTUDIES ON MECHANICAL PROPERTIES OF Al - BASED CAST COMPOSITES
The economy is very important feature nowadays in the market. The researches are playing an important role in engineering field to increase the life of machine parts / components and decrease the cost. The composite materials have the potential to replace widely used steel and aluminium due to their good characteristics with better performance. The Al-based composites have found extensive appli...
متن کاملEFFECT OF T6 HEAT TREATMENT ON MECHANICAL PROPERTIES OF CERAMIC REINFORCED CASTED ALUMINUM ALLOY
Aluminium base alloy (Al-Cu-Si) was reinforced with silicon carbide (SiC) particles, in various percentage compositions from 0-20 wt%. Silicon carbide particle size of 20µm was selected. The molten slurry of SiC reinforced base aluminium metal was casted through green and dry sand casting methods and solidification process was carried out under ambient conditions. A selected population...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Resource-Efficient Technologies
سال: 2021
ISSN: 2405-6537
DOI: 10.18799/24056537/2021/1/281