Comparative Investigations on Al7075 MMC reinforced with wt. %6 Al2O3 and B4C
نویسندگان
چکیده
منابع مشابه
Densification and Mechanical Properties of B4C with Al2O3 as a Sintering Aid
The densification behavior and mechanical properties of B4C hot-pressed at 2000°C for 1 h with additions of Al2O3 up to 10 vol% were investigated. Sinterability was greatly improved by the addition of a small amount of Al2O3. The improvement was attributed to the enhanced mobility of elements through the Al2O3 near the melting temperature or a reaction product formed at the grain boundaries. As...
متن کاملDevelopment of Al2O3 fiber-reinforced Al2O3-based ceramics.
The purpose of this study was to use a tape casting technique to develop an Al2O3 fiber-reinforced Al2O3-based ceramic material (Al2O3-fiber/Al2O3 composite) into a new type of dental ceramic. The Al2O3-based ceramic used a matrix consisting of 60 wt% Al2O3 powder and 40 wt% SiO2-B2O3 powder. The prepreg sheets of Al2O3-fiber/Al2O3 composite (in which uniaxially aligned Al2O3 fibers were infilt...
متن کاملNanocrystalline Al7075 + 1 wt % Zr Alloy Prepared Using Mechanical Milling and Spark Plasma Sintering
The microstructure, phase composition, and microhardness of both gas-atomized and mechanically milled powders of the Al7075 + 1 wt % Zr alloy were investigated. The gas-atomized powder exhibited a cellular microstructure (grain size of a few µm) with layers of intermetallic phases along the cell boundaries. Mechanical milling (400 revolutions per minute (RPM)/8 h) resulted in a grain size reduc...
متن کاملMgO Doped Carbon Nanotube-reinforced Al2O3 Nanocomposite
Carbon nanotubes (CNTs) are probably the strongest material ever known with outstanding mechanical, electrical and physical properties [1, 2]. It is postulated that by transferring these fabulous properties as reinforcements in inorganic matrices, a new class of nanocomposite to meet the requirement of advanced applications will be generated. Al2O3 ceramics have been widely used for structural,...
متن کاملStudy on the strengthening mechanisms and failure modes of the ultra-fine grained tri-modal Al5083-5wt. %B4C-Al2024 and Al5083-5 wt. %B4C-Al5083 composites
In this paper, the influence of Al2024 and Al5083 aluminum alloy coarse grains on mechanical properties and fracture mechanism of Al5083-B4C tri-modal composite has been discussed. Al5083 alloy powders with 5 wt. % of boron carbide were milled for 36 hours and 25 and 50 wt. % of coarse grain (CG) Al2024 and Al5083 powders were added to the milled powders and then hot press under argon atmospher...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2018
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/376/1/012095