Comparative high voltage impulse measurement
نویسندگان
چکیده
منابع مشابه
Comparative High Voltage Impulse Measurement
A facility has been developed for the determination of the ratio of pulse high voltage dividers over the range from 10 kV to 300 kV using comparative techniques with Kerr electro-optic voltage measurement systems and reference resistive voltage dividers. Pulse voltage ratios of test dividers can be determined with relative expanded uncertainties of 0.4 % (coverage factor k = 2 and thus a two st...
متن کاملA High-Voltage Cable-Fed Impulse Radiating Antenna
We describe here a 1.52 m (5 ft.) diameter Impulse Radiating Antenna (IRA) for use in a high-voltage radar system that uses a single antenna and a directional coupler. This antenna, designated the IRA-6, was designed to operate at 30 kV. To accommodate the higher voltage, we introduced a number of new features, including a larger-diameter 100-ohm cable, cable stubs at the feed point, and gaps i...
متن کاملSF6 High Voltage Circuit Breaker Contact Systems Under Lightning Impulse and Very Fast Transient Voltage Stress
In the past few years gas insulated high voltage circuit breakers have improved considerably, in particular with respect to required drive energy for operation, compactness and reliability. A further reduction in size implies increasing operational field stress inside the breaker and, thus, a reduction in built-in safety margins. If the design comes closer to its physical limits, in particular ...
متن کاملComparative Study of High Density Impulse Noise Removal Method
Abstract— This Paper Presents Comparative Study of High Density Impulse Noise Removal method. Impulse noise is interference information pixels which result the black and white dots are spread distributed on the image. This type of noise can be caused by analog-to-digital converter errors, bit errors in transmission. Modified Mean-Median & ROM (MMM&R) filter that used to reduce impulse noise. Me...
متن کاملHybrid-PIC modeling of a high-voltage, high-specific-impulse Hall thruster
The primary life-limiting mechanism of Hall thrusters is the sputter erosion of the discharge channel walls by high-energy propellant ions. Because of the difficulty involved in characterizing this erosion experimentally, many past efforts have focused on numerical modeling to predict erosion rates and thruster lifespan, but those analyses were limited to Hall thrusters operating in the 200–400...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Research of the National Institute of Standards and Technology
سال: 1996
ISSN: 1044-677X
DOI: 10.6028/jres.101.063