Comparative Assessment on Machinability of Nano-Structured Bainitic Steel and Titanium64
نویسندگان
چکیده
منابع مشابه
Prediction of steel machinability by genetic programming
Purpose: This paper describes intelligent system to predict steel machinability. Design/methodology/approach: The prediction of machinability of steel, depending on input parameters (percentage of calcium, percentage of oxygen, percentage of sulphur), was performed by means of genetic programming and data on the batches of steel already made. Findings: The mathematical model to predict machinab...
متن کاملPreparation and Mechanical Properties of Nano/Ultrafine Bainitic Structure in AISI 52100 Steel
The development of nano/ultrafine bainitic structure in AISI 52100 steel was the goal of this study. For this purpose,the AISI 52100 the specimens were austenitized at 1050 °C for 60 min followed by low-temperature austemperingtreatment at different temperatures and times. The austempered samples were characterized using field emissionscanning electron microscopy (FESEM), X-ra...
متن کاملEnhanced Thermal Stability in Nanostructured Bainitic Steel
We report an attempt at increasing the thermal stability of nanocrystalline bainite to tempering heat-treatments, by enhancing the silicon concentration of the alloy. Validation experiments have been conducted using synchrotron X-radiation during tempering heat treatment. It is found that the change in alloying successfully stabilises the austenite at elevated temperatures by retarding cementit...
متن کاملMorphology Feature of Nanostructure Bainitic Steel after Tempering Treatment
The microstructure characterization of tempered nanocrystalline bainitic steel is investigated in the present study. It is found that two types of plastic relaxation, dislocation debris and nanotwin, occurs in the displacive transformation due to relatively low transformation temperature and high carbon content. Because most carbon atoms trap in the dislocation, high dislocation density can be ...
متن کاملMicrostructure Evolution during Tensile Deformation of a Nanostructured Bainitic Steel
In situ neutron diffraction experiment was used during tensile testing at room temperature to examine the changes on the percentage and texture of both ferrite and austenite in a nanocrystalline bainitic steels transformed at two different temperatures 200°C and 300oC for different times to achieve the same phase percentages. Both samples showed an inadequate capability of austenite to transfor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Science and Chemical Engineering
سال: 2014
ISSN: 2327-6045,2327-6053
DOI: 10.4236/msce.2014.27004