Compact lowpass filter with sharp roll-off and wide stopband using dual-stepped impedance resonator

Compact Microstrip Lowpass Filter with Sharp Roll-off and Wide Stopband Using Semicircle Ended Stub Resonator

In this paper, a semicircle ended stub resonator, cascaded to a modified radial patch to design a compact lowpass filter with sharp roll-off and wide stopband is proposed. This filter has 3 dB cutoff frequency at 1.54 GHz. The transition band is only 0.26GHz from 1.54 GHz to 1.8 GHz with corresponding attenuation levels of −3 dB and −20 dB respectively. Maximum insertion loss is 0.1 dB in the p...

Compact LPF using T-shaped resonator with sharp roll-off and ultra wide stopband

  In this paper, a microstrip lowpass filter with an ultra-wide stopband with sharp roll-off and compact size is designed and fabricated. To provide a very small dimension, T-shaped and stepped impedance have been used. The cut of frequency at -3 dB is 3.1 GHz. In the proposed structure, insertion loss is less than 0.12 and return loss is more than 15 dB. To achieve a -20dB attenuation level...

Wide Stopband and Sharp Roll-off Microstrip Lowpass Filter using Modified Rhombic Shaped Resonator

Compact and Wide Stopband Lowpass Filter Using Open Complementary Split Ring Resonator and Defected Ground Structure

A compact (0.16 g × 0.08 g) and wide stopband lowpass filter design using open complementary split ring resonator (OCSRR) and defected ground structure (DGS) is presented in this paper. Low pass filter is constructed using two cascaded stages of OCSRR. Since the rejection bandwidth of the OCSRR is narrow, tapered dumbbell shaped DGS section is placed under the OCSRR to enhance the bandwidth. Th...

Compact Microstrip Lowpass Filter with Wide Stopband and High Attenuation

A compact microstrip lowpass filter using radial stub resonators is developed. This filter is composed of two radial stub resonators that are asymmetrically connected to each other by a stepped impedance structure. This structure results in a very high rejection and wide stopband. The proposed filter with a 3 dB cutoff frequency of 2.07 GHz has been designed, fabricated and measured. Measuremen...