Compact Boiling Refrigerant Type Cooling Unit Using Multi-Stacked Radiator Cores for Automobile. Comparison with Heat Pipe Type Cooling Unit.

Stacked Microchannel Heat Sinks for Liquid Cooling of Microelectronics Devices

for their time and efforts in reviewing the proposals and dissertations and their helpful advices. My sincere gratitude goes to DARPA and Intel Corporation for their financial support. I would also like to thank the University of Maryland College Park for their financial support in the form of Graduate School Fellowship. I would also like to take this opportunity to express my appreciations and...

Feasibility study on novel hybrid ground coupled heat pump system with nocturnal cooling radiator for cooling load dominated buildings

When the ground coupled heat pump (GCHP) system is utilized for air conditioning in cooling load dominated buildings, the heat rejected into ground will accumulate around the ground heat exchangers (GHE) and results in system performance degradation. A novel hybrid ground coupled heat pump (HGCHP) system with nocturnal cooling radiator (NCR) works as supplemental heat rejecter is proposed in th...

Investigation of Packaged Miniature Heat Pipe for Notebook PC Cooling

Miniature heat pipe (MHP) with woven-wired wick was used to cool the CPU of a notebook PC. The pipe with circular cross-section was pressed and bent for packaging the MHP on the very limited space of a notebook PC. A cross-sectional area of the pipe is reduced about 30% when the MHP with 4mm diameter is pressed to 2mm thickness. In this study, a performance test has been performed in order to r...

MULTI-PHASE CFD-CONJUGATE HEAT TRANSFER FOR SPRAY COOLING IN THE NON-BOILING REGIME by

A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System

In the presented research, heat transfer of a mobile electrolyte alkaline fuel cell (AFC) (which the electrolyte has cooling role of system) has been considered. Proper control volumes of system with specific qualification have been chosen. Consequently, heat and mass transfer in control volumes have been assessed. Considerations on them and contributed models lead to approve a double tube heat...