Compact, Angled Polarization Splitter: Characterization of Broadband Performance and Fabrication Tolerance
نویسندگان
چکیده
منابع مشابه
Ultracompact and fabrication-tolerant integrated polarization splitter.
Design and fabrication of a 2×2 two-mode interference (TMI) coupler based on-chip polarization splitter is presented. By changing the angle between the access waveguides, one can tune the effective TMI length for the mode with less optical confinement (transverse magnetic, TM) to coincide with the target TMI length for a desired transmission of the mode with higher optical confinement (transver...
متن کاملCompact and broadband polarization beam splitter based on a silicon nitride augmented low-index guiding structure.
We propose a compact polarization beam splitter (PBS) based on a silicon nitride enhanced silicon-on-insulator platform using an augmented low-index guiding (ALIG) waveguide structure. In the ALIG structure, the TM mode is mostly confined in the low-index silicon nitride, while the TE mode is confined in the high-index silicon. Since the two modes are confined in two separate layers, their prop...
متن کاملUltracompact Plasmonic-Mode-Assisted Polarization Splitter with A Large Fabrication Tolerance
An ultra-compact plasmonic-mode-assisted polarization splitter based on directional coupler is proposed and investigated analytically and numerically. A large modal birefringence of > 0.69 is estimated, enabling a clean polarization separation within 5.6 1m. Keywords-Polarization splitters; surface plasmons; plasmonic waveguides
متن کاملA compact integrated polarization splitter/converter in InGaAsP/InP
A novel design for an integrated passive polarization splitter/converter combination is presented. The device consists of a Mach–Zehnder interferometer with polarization converters in both arms. The device is analyzed using the transfer matrix method and fabricated in InGaAsP–InP. Measurement results show a splitting ratio of approximately 10 dB and a conversion of>90%. This device can be monol...
متن کاملDesign of Photonic Crystal Polarization Splitter on InP Substrate
In this article, we suggested a novel design of polarization splitter based on coupler waveguide on InP substrate at 1.55mm wavelength. Photonic crystal structure is consisted of two dimensional (2D) air holes embedded in InP/InGaAsP material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. The photonic band gap (PBG) of this structure is determined using t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Photonics Journal
سال: 2018
ISSN: 1943-0655,1943-0647
DOI: 10.1109/jphot.2018.2878905