Comments on “Explicit transient solutions for a mode III crack subjected to dynamic concentrated loading in a piezoelectric material” by Yi-Shyong Ing, Mau-Jung Wang [Int. J. Solids Struct. 41 (2004) 3849–3864]
نویسندگان
چکیده
منابع مشابه
Crack Influences on the Static and Dynamic Characteristic of a Micro-Beam Subjected to Electro Statically Loading
In the present work the pull-in voltage of a micro cracked cantilever beam subjected to nonlinear electrostatic pressure was studied. Two mathematical models were employed for modeling the problem: a lumped mass model and a classical beam model. The effect of crack in the lumped mass model is the reduction of the effective stiffness of the beam and in the beam model; the crack is modeled as a m...
متن کاملModel for a piezoelectric strip of crack arrest subjected to Mode-I loadings
Purpose: In the present paper a crack arrest model is proposed for an infinitely long narrow poled piezoelectric strip embedded with a centrally situated finite hairline straight crack. Design/methodology/approach: The ceramic of the strip is assumed to be mechanically brittle and electrically ductile. Combined mechanical and electrical loads applied at the edge of the strip open the rims of th...
متن کاملCrack Tip Constraint for Anisotropic Sheet Metal Plate Subjected to Mode-I Fracture
On the ground of manufacturing, sheet metal parts play a key role as they cover about half of the production processes. Sheet metals are commonly obtained from rolling and forming processes which causes misalignment of micro structure resulting obvious anisotropic characteristics and micro cracks. Presence of micro cracks poses serious attention, when stresses at the tip reach to the critical v...
متن کاملPropagation of a mode-III interfacial conductive crack along a conductive interface between two piezoelectric materials
An analysis is presented for transient response of a mode-III interfacial crack propagating between two dissimilar piezoelectric half spaces. The dynamic fracture toughness of a piezoelectric interface is examined, which is a central issue related to the interface strength of multi-layered sensors and ferroelectric thin film devices. For the mode-III crack propagation in piezoelectric materials...
متن کاملMixed Mode Loading of an Interface Crack Subjected to Creep Conditions
Interface cracks are seldom subjected to pure Mode I or pure Mode II conditions. Station~y interface cracks between two distinct, bonded elastic-creep materials subjected to remotely applied mixed mode loading are simulated. The finite element method (FEM) is used to examine crack tip fields and candidate driving force parameters for crack growth. Plane strain conditions are assumed. In most ca...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2005
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2005.03.071