Comment on “Evolution of wall shear stress with Reynolds number in fully developed turbulent channel flow experiments”
نویسندگان
چکیده
منابع مشابه
Static pressure correction in high Reynolds number fully developed turbulent pipe flow
Measurements are reported of the error in wall static pressure reading due to the finite size of the pressure tapping. The experiments were performed in incompressible turbulent pipe flow over a wide range of Reynolds numbers, and the results indicate that the correction term (as a fraction of the wall stress) continues to increase as the hole Reynolds number d+ = uτd/ν increases, contrary to p...
متن کاملeffect of sub-grid scales on large eddy simulation of particle deposition in a turbulent channel flow
چکیده ندارد.
15 صفحه اولTurbulence statistics in fully developed channel flow at low Reynolds number
A direct numerical simulation of a turbulent channel flow is performed. The unsteady Navier-Stokes equations are solved numerically at a Reynolds number of 3300, based on thc mean centreline velocity and channel half-width, with about 4 x los grid points (192 x 129 x 160 in 2, y, 2). All essential turbulence scales are resolved on the computational grid and no subgrid model is used. A large num...
متن کاملNumerical Study of Reynolds Number Effects on Flow over a Wall-Mounted Cube in a Channel Using LES
Turbulent flow over wall-mounted cube in a channel was investigated numerically using Large Eddy Simulation. The Selective Structure Function model was used to determine eddy viscosity that appeared in the subgrid scale stress terms in momentum equations. Studies were carried out for the flows with Reynolds number ranging from 1000 to 40000. To evaluate the computational results, data was compa...
متن کاملPIV Measurements of turbulence statistics and near-wall structure of fully developed pipe flow at high Reynolds number
Fully developed turbulent pipe flow at Re=11300 as well as Re=5300 is measured by PIV using water as working fluid. Excellent agreement with DNS (Direct Numerical Simulation) by Satake (2000) is achieved by choosing optimum measurement parameters such as spatial resolution, time separation of two images, and number of samples. The test section is 6.7m long stainless steel pipe with transparent ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physical Review Fluids
سال: 2020
ISSN: 2469-990X
DOI: 10.1103/physrevfluids.5.127601