Combustion model reduction for diesel engine control design
نویسندگان
چکیده
منابع مشابه
A dynamic PCCI combustion model for Diesel engine control design
Subject of this work is a dynamic simulation model for PCCI combustion that can be used in closed-loop control development. A detailed multi-zone chemistry model for the high-pressure part of the engine cycle is extended by a mean value model accounting for the gas exchange losses. The resulting model is capable of describing PCCI combustion with stationary exactness. It is at the same time ver...
متن کاملActive Combustion Control of Diesel HCCI Engine: Combustion Timing
We propose a model based control strategy to adapt the injection settings according to the air path dynamics on a Diesel HCCI engine. This approach complements existing airpath and fuelpath controllers, and aims at accurately controlling the start of combustion. For that purpose, start of injection is adjusted based on a Knock Integral Model and intake manifold conditions. Experimental results ...
متن کاملControl Design for a Diesel Engine Model with Time Delay
The concept of control Lyapunov function has proven a useful tool for designing robust control laws for nonlinear systems. Recently, this concept has been extended to time-delay systems in the form of Control Lyapunov Razumikhin functions and Control Lyapunov Krasovsky functionals (CLKF). Universal formulas, such as Sontag's formula and domination redesign formula, apply to CLKF's and achieve r...
متن کاملCombustion Improvement for Reducing Exhaust Emissions in DI Diesel Engine
Multidimensional modelling of open-cycle process of OM355 engine was developed. Calculations for computational mesh were carried out. The results of the model were validated by experimentally measured in-cylinder pressure and the good agreement between calculations and measurements approved the trustworthy of numerical code. Results included pressure, temperature, emission and Rate of heat rel...
متن کاملA Semi-empirical Model to Predict Diesel Engine Combustion Parameters
To carry out the investigation, a cylinder pressure model was developed based on the position of the crankshaft, engine load, engine speed, and fuel injection time. This model takes into account the maximum number of parameters involved. The accuracy of the model was verified by experimental results. The average error of the cylinder pressure, the average radical of the square of the error of t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Engine Research
سال: 2009
ISSN: 1468-0874,2041-3149
DOI: 10.1243/14680874jer04509