Combustion Characteristics of Gas Fuel From Basic Materials Arak Bali

Sulfur Release from Cement Raw Materials during Solid Fuel Combustion

During combustion of solid fuels in the material inlet end of cement rotary kilns, local reducing conditions can occur and cause decomposition of sulfates from cement raw materials. Decomposition of sulfates is problematic because it increases the gas-phase SO2 concentration, which may cause deposit formation in the kiln system. SO2 release from cement raw materials during combustion of solid f...

Environmental Effects of Toxic Materials from Oil and Gas Combustion

Combustion Characteristics of Syngas and Natural Gas in Micro-pilot Ignited Dual-fuel Engine

The objective of this study is to investigate the combustion in a pilot-ignited supercharged dual-fuel engine, fueled with different types of gaseous fuels under various equivalence ratios. It is found that if certain operating conditions are maintained, conventional dual-fuel engine combustion mode can be transformed to the combustion mode with the two-stage heat release. This mode of combusti...

Combustion of Reformed Gas and Liquid Fuel in Crgt Combustor

Original scientific paper Numerical simulations of four combustion processes in a dual-fuel combustor of chemically recuperated gas turbine (CRGT) were carried out in this work. The fuels in the four combustion processes were liquid fuel, liquid fuel + steam, liquid fuel + reformed gas and reformed gas, respectively. The mathematical models adopted for different fuels combustion consist of real...

Combustion Characteristics of a Diesel-hydrogen Dual Fuel Engine

Among the alternative fuels, hydrogen shows great potential in the near future. In the present study, hydrogen utilization as diesel engine fuel was investigated. Hydrogen can not be used directly in a diesel engine due to its autoignition temperature higher than that of diesel fuel. One alternative method is to use hydrogen in enrichment or induction. To investigate the combustion characterist...