Combining polyethylene and polypropylene: Enhanced performance with PE/iPP multiblock polymers

Biodegradation of polyethylene and polypropylene

Polyethylene and polypropylene are the two polyolefins with wide ranging applications. They are recalcitrant and hence remain inert to degradation and deterioration leading to their accumulation in the environment, and, therefore creating serious environmental problems. In this review, biodegradation of these two polymers under in vitro conditions is reported. An attempt has been made to cover ...

Tensile and impact behavior of polypropylene/low density polyethylene blends

Blends of polypropylene (PP) and low-density polyethylene (LDPE) may contribute to make recycling more economically attractive. The aim of this work was to make PP/LDPE blends (0/100, 25/75, 50/50, 75/25 and 100/0 w/w) via injection molding carried out under various injection temperatures and to evaluate their tensile and impact properties. The blends yielded tensile stress–strain curves very d...

Preparation and Compatibility Evaluation of Polypropylene/High Density Polyethylene Polyblends

This study proposes melt-blending polypropylene (PP) and high density polyethylene (HDPE) that have a similar melt flow index (MFI) to form PP/HDPE polyblends. The influence of the content of HDPE on the properties and compatibility of polyblends is examined by using a tensile test, flexural test, Izod impact test, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTI...

Creep and Stress Relaxation Behavior of Polypropylene, Metallocene-Prepared Polyethylene and their Blends

Determination of percent polyethylene in polyethylene/polypropylene blends using cast film FTIR techniques

Polyethylene (PE) is the most common group of thermoplastic polymers due to its low cost and versatile physical properties. PE is blended with polypropylene (PP) to improve physical properties, such as low temperature impact performance. The composition of these blends is important with regard to performance, and the correct mixing of the pure homopolymers (PE and PP) can eliminate the need for...