Combined wear of slurry erosion, cavitation erosion, and corrosion on the simulated ship surface
نویسندگان
چکیده
منابع مشابه
Erosion-corrosion and wear
The basic processes of wear, erosion and erosion-corrosion are reviewed. It is shown that oxide debris can accelerate wear when it is present as particulates, or protect and reduce friction when it is present as a glaze. Erosion-corrosion processes can be understood and organized in a series of regimes that represent a sequence of change in the relative intensities of erosive and corrosive proc...
متن کاملAnimating Corrosion and Erosion
In this paper, we present a simple method for animating natural phenomena such as erosion, sedimentation, and acidic corrosion. We discretize the appropriate physical or chemical equations using finite differences, and we use the results to modify the shape of a solid body. We remove mass from an object by treating its surface as a level set and advecting it inward, and we deposit the chemical ...
متن کاملComparison of cavitation erosion rate with liquid impingement erosion rate
Both cavitation erosion and liquid impingement erosion are phenomena that can cause pipe wall thinning in power plants. The Code for Power Generation Facilities, Rules on Pipe Wall Thinning Management, was published by the JSME (Japan Society of Mechanical Engineers) in 2005. The code says that cavitation erosion shall be prevented either in the design stage or by daily inspection. On the other...
متن کاملThe effect of surface rock fragments deployment pattern on soil erosion processes under simulated conditions
Extended abstract 1- Introduction The Soil surface characteristics have significant effects on the erosion process. The wide areas of watershed soil surfaces are covered with considerable amounts of rocks and pebbles. Surface rock fragments, resulting in water connectivity, change during the erosion process. Rock fragments on the soil surface may increase the infiltration and reduce soil loss...
متن کاملErosion, Corrosion and Erosion-Corrosion of EB PVD Thermal Barrier Coatings
Electron beam (EB) physical vapour deposited (PVD) thermal barrier coatings (TBCs) have been used in gas turbine engines for a number of years. The primary mode of failure is attributed to oxidation of the bondcoat and growth of the thermally grown oxide (TGO), the alumina scale that forms on the bondcoat and to which the ceramic top coat adheres. Once the TGO reaches a critical thickness the T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Mechanical Engineering
سال: 2019
ISSN: 1687-8140,1687-8140
DOI: 10.1177/1687814019834450