Combined Polishing of Cemented Carbide with Fine Hole
نویسندگان
چکیده
منابع مشابه
Development of Creep-Resistant Tungsten Carbide Copper Cemented Carbide
Fine-grained tungsten carbide copper (WC-Cu) cemented carbide was sintered via spark plasma sintering at 1773K using a fine WC powder with a mean particle size of 0.11 mm. The mechanical properties were compared with tungsten carbide cobalt (WC-Co) cemented carbide and a binderless WC-sintered material. The Vickers hardness and fracture toughness obtained by the indentation fracture method for ...
متن کاملSub-Surface Damage Removal in Fabrication & Polishing of Silicon Carbide
Silicon Carbide (SiC) is emerging as a promising substrate for systems which leverage the low lattice mismatch with Gallium Nitride (GaN), high power density, heat dissipation and radiation hardness properties unique to this semiconductor. Wafer fabrication and polishing of SiC substrates poses processing issues as a result of the material’s high Mohs hardness (~9.25), and chemical inertness. P...
متن کاملDevelopment of Cemented Carbide Tool of Reduced Rare Metal Usage
Cemented carbides, including coated cemented carbides, account for 75% of the cutting tools market because of their features such as high hardness, toughness, and the responsiveness to iron, through the use of tungsten carbide for their main hard phases and cobalt for their bonding metals. The consumption of tungsten continues to increase as the amount of carbide tool production increases with ...
متن کاملMicrowave synthesis of phase-pure, fine silicon carbide powder
Fine, monophasic silicon carbide powder has been synthesized by direct solid-state reaction of its constituents namely silicon and carbon in a 2.45 GHz microwave field. Optimum parameters for the silicon carbide phase formation have been determined by varying reaction time and reaction temperature. The powders have been characterized for their particle size, surface area, phase composition (X-r...
متن کاملInfluence of electrical discharge machining on sliding friction and wear of WC–Ni cemented carbide
Tribological characteristics of fine-grained WC–8 wt%Ni with different surface finishing conditions corresponding to sequential wire electrical discharge machining (wire-EDM) or grinding were investigated by performing dry reciprocating sliding experiments on TE77 pin-on-plate equipment with WC–6 wt%Co as mating material. Surface finishes and wear surfaces were characterized using surface topog...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Denki Kako Gakkaishi
سال: 2006
ISSN: 1881-0888,0387-754X
DOI: 10.2526/jseme.40.177