COMBINED METHOD OF ELECTRIC ENERGY CONSUMPTION MANAGEMENT OF PRODUCTION FACILITIES

The article investigates the methods of power consumption control. It is shown that shortage during peak hours makes it difficult to maintain a balance between generation and capacity, which leads need introduce restrictions on electrical load industrial consumers development tools control consumption. manage energy due number reasons, including: 1) significant difference night failure in systems; 2) insufficient regulatory capacity thermal plants nuclear cover variable part schedules; 3) unfavorable tendency reduce share shunting systems caused by consolidation units; 4) capital costs associated with construction operation 5) technical feasibility economic artificial alignment schedules. following are currently known: instantaneous rate; at ideal norm; management forecast value; use average moving time interval (moving window method) combined different combinations, as well distribution influence - regulators (resource allocation method). better consider such method provides for larger managed random possible short-term emissions, their minimum absolute value, more complete consumer declared or allocated limits. According these criteria, listed compared. Moreover, rate implemented automatic using signal proportional 1, 2 3 minutes, norm involves measuring short periods (up three minutes) comparing this value ( limit) power, prediction formed amount predicted end cycle. To increase efficiency management, proposed, synthesis two known over consumption, combines advantages both methods. condition maintenance mode set not exceeded its used much possible. Fulfillment provided working off each step management. Due fact steps have reactions real process, appropriate steps. In first steps, when there enough adopt optimal effect can be adjusted, based electricity last special responsibility process; carried out norm. Thus, (control justified) (in allows remaining limit exceed specified value) priori justified order consumers-regulators.