Column adsorption study for the removal of chromium and manganese ions from electroplating wastewater using cashew nutshell adsorbent

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Activated Carbon from Olive Wastes as an Adsorbent for Chromium Ions Removal

Adsorption of Chromium ions (VI) and (III) in aqueous solution was investigated using activated carbon prepared from olive wastes, by one step physical activation with steam. After adsorbent material characterization using adsorption capacity of methylene blue, iodine and phenol, BET surface area, Fourier Transform InfraRed (FT-IR) spectroscopy, pHpzc, surface functions based on the Boehm m...

متن کامل

Adsorption of Copper(II) from an Wastewater Effluent of Electroplating Industry by Poly(ethyleneimine)-Functionalized Silica

The poly(ethyleneimine)-functionalized silica has been developed successfully as an effective adsorbent for the adsorption removal of Cu(II) ions from electroplating wastewater. The influences of pH, contact time and initial concentration of Cu(II) ions on the adsorption capacity and the effect of adsorbent dosage on the removal efficiency of Cu(II) ions from electroplatin...

متن کامل

Column operation studies for the removal of dyes and phenols using a low cost adsorbent

Fertilizer plant waste carbon slurry has been investigated after some processing as an adsorbent for the removal of dyes and phenols using columns. The results show that the carbonaceous adsorbent prepared from carbon slurry being porous and having appreciable surface area (380 m2/g) can remove dyes both cationic (meldola blue, methylene blue, chrysoidine G, crystal violet) as well a...

متن کامل

Removal of Hexavalent Chromium from Electroplating Wastewater by Electrocoagulation with Iron Electrodes

The performance of electrocoagulation using iron electrodes for the removal of hexavalent chromium from synthetic aqueous solutions and actual industrial electroplating wastewater was studied. Parameters affecting the electrocoagulation process, such as initial pH, applied current density, initial metal ion concentration, COD and time of electroprocessing were investigated. The optimum pH was f...

متن کامل

Chromium removal and water recycling from electroplating wastewater through direct osmosis: Modeling and optimization by response surface methodology

Background: Considering the carcinogenic effects of heavy metals, such as chromium, it is essential to remove these elements from water and wastewater. Direct osmosis is a new membrane technology, which can be a proper alternative to conventional chromium removal processes. Methods: The wastewater samples were collected from an electroplating unit, located in Alborz industrial city, Qazvin, Ir...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Cogent Engineering

سال: 2020

ISSN: 2331-1916

DOI: 10.1080/23311916.2020.1748470