Coloring by anodic electrodeposited cobalt oxide.
نویسندگان
چکیده
منابع مشابه
Anodic aluminum oxide microchannel plates
A new material for microchannel plates (MCP) is proposed — anodic aluminum oxide. Microchannel plates made of this material may be much cheaper than with conventional lead glass MCP. Also a significantly smaller channel diameter (up to 70 nm) is easily achievable, which means better spatial resolution and the possibility to operate in strong magnetic fields. Methods and means are developed for ...
متن کاملPreparation of Cobalt Oxide/Zinc Oxide Nanocomposite
Cobalt Oxide/ Zinc Oxide nanocomposite was synthesized by dropwise addition ofCo(NO)3.6H2O and Zn(NO3)2.4H2O solutions to KOH solution at different temperatures followed bycalcination at 300ºC for 4 h. The morphology and structure of nanoparticles and the influence oftemperature on particle size were studied using scanning electron microscopy (SEM) and X-RayDiffraction (XRD). Minimum particle s...
متن کاملSelf-ordered anodic aluminum oxide formed by H2SO4 hard anodization.
The self-ordering of nanoporous anodic aluminum oxide (AAO) in the course of the hard anodization (HA) of aluminum in sulfuric acid (H2SO4) solutions at anodization voltages ranging from 27 to 80 V was investigated. Direct H2SO4-HA yielded AAOs with hexagonal pore arrays having interpore distances D(int) ranging from 72 to 145 nm. However, the AAOs were mechanically unstable and cracks formed a...
متن کاملGaN Based Nanomaterials Fabrication with Anodic Aluminium Oxide by MOCVD
A highly self-ordered hexagonal array of cylindrical pores has been fabricated by anodizing a thin film of Al on substrate and subsequent growth of GaN and InGaN in these nanoholes has been performed. This AAO templatebased synthesis method provides a low cost process to fabricate GaN-based nanomaterials fabrication.
متن کاملTitanium oxide nanotube arrays prepared by anodic oxidation
Titanium oxide nanotubes were fabricated by anodic oxidation of a pure titanium sheet in an aqueous solution containing 0.5 to 3.5 wt% hydrofluoric acid. These tubes are well aligned and organized into high-density uniform arrays. While the tops of the tubes are open, the bottoms of the tubes are closed, forming a barrier layer structure similar to that of porous alumina. The average tube diame...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1989
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.40.148