Collapse Load of Cracked Member under Axial Force and Bending Moment and Its Applications : 1st Report, Collapse Load of Edge-Cracked Member in Plane Strain
نویسندگان
چکیده
منابع مشابه
A numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load
Existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. Therefore, it must be considered in stress analysis and designing and loading of such structures. In this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...
متن کاملinvestigation of the stability and vibration of cracked columns under compressive axial load
in this paper, a new analytical method is proposed to study the effect of crack and axial load on vibration behavior and stability of the cracked columns. using the local flexibility model, the crack has been simulated by a torsional spring with connecting two segments of column in crack location. by solving governing eigenvalue equation, the effect of crack parameters and axial load on the nat...
متن کاملInvestigating the Effectiveness of a Composite Patch on Repairing Pipes Subjected to Circumferential Cracks under Combined Loadings
The purpose of this study is to investigate bending moment and the axial load capacity of a pressurized pipe suffering from a through-wall circumferential crack repaired by a composite sleeve. The three-dimensional finite element method (FEM) was adopted to compute the results, and the failure assessment diagram (FAD) was employed to investigate the failure behavior of the repaired pipe. The fi...
متن کاملa numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load
existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. therefore, it must be considered in stress analysis and designing and loading of such structures. in this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...
متن کاملExperimental and Numerical Analysis of the Critical Buckling Load of Cracked Sheets
Collapse by buckling a quite common phenomenon in sheets under pressure. When these structures caused by defects such as corrosion and cracks the time of the occurrence of this phenomenon is sensitive and critical load to be significantly reduced. Therefore, in this article sheet of aluminum Al 1200 by cracks in a part of the sheet will be considered. Left angle on the critical buckling load ef...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1983
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.49.1076