COLLAPSE FRAGILITY CURVES FOR SEISMIC ASSESSMENT OF SUPERPLASTIC SHAPE MEMORY ALLOY IN REINFORCED CONCRETE STRUCTURES

Evaluation of Seismic Response of Concrete Structures Reinforced by Shape Memory Alloys (Technical Note)

Shape memory alloys (SMAs) are unique smart materials that have many advantages, such as ability to resist large strains without leaving residual strains and ability to recover original form. However, the high costs of SMAs have limited their usage. This paper evaluates the behavior of concrete structures equipped with SMAs in an optimal manner as they are being used along the plastic hinge of ...

Fragility Curves for Reinforced Concrete Frames with Lap-Spliced Columns

Placing column lap-splice in the locations of possible nonlinear deformation may adversely affect the structures response to strong ground motions. Localization of damage in splice zone may change the structural response and prevent the load redistribution and development of a uniform pattern of nonlinear excursions among the various members. Validated by existing laboratory experiments, this s...

Time-dependent Seismic Fragility Curves on Optimal Retrofitting of Neutralized Reinforced Concrete Bridges

A methodology for Determining the Seismic Vulnerability of Old Concrete Highway Bridges by Using Fragility Curves

Past earthquakes have demonstrated that old RC bridges may be seismically vulnerable. Bridge responses during the last decades illustrated the necessity of the seismic assessment of bridges especially those which were designed with old codes. In this research an existing concrete bridge representative of the most common bridges in the highway system in Iran are studied. Push over and nonlinear ...

SEISMIC OPTIMIZATION OF STEEL SHEAR WALL USING SHAPE MEMORY ALLOY

Nowadays, steel shear walls are used as efficient lateral-load-resistant systems due to their high lateral stiffness and carrying capacity. In this paper, the effect of substituting a shape memory alloy (SMA) material is investigated instead of using conventional steel in the shear wall. A numerical study is conducted using finite element method (FEM) by OpenSees software. For this purpose, at ...