Cold Wire Addition in MAG Welding

Development Technology for Welding in Mig-mag Shielding Gas Environment

The information system is a coherently structured assembly, made of electronic computing and communication equipments, software, processes, automated and manual procedures, used as automatic data processing tool within a field of activity. In the process of welding in shielding gas environment with fusible electrode, there are used either inert or active gases. Therefore, we make the distinctio...

Mag Welding Process - Analysis of Welding Parameter Influence on Joint Geometry

Quality of welded joint at MAG welding process depends of numbers of influences, like type and thickness of base metal, groove type, welding position etc., but the proper selection of welding parameters is also very important. Due to that, the analysis of weld bead geometry at MAG welding process with regard to weld current, voltage and weld speed (heat input) and the type and shielding gas flo...

Tušek: Bridging of Welding Gaps in Welding with a Multiple-wire Electrode

An investigation on bridging larger welding gaps between workpieces occurring in practice due to structural requirements or to defects in weld edge preparation is described. Some characteristic cases from practice where a larger root gap should be bridged or the space between two or three workpieces should be filled with a greater quantity of filler material are described. Submerged-arc welding...

Laser Indirect Shock Welding of Fine Wire to Metal Sheet

The purpose of this paper is to present an advanced method for welding fine wire to metal sheet, namely laser indirect shock welding (LISW). This process uses silica gel as driver sheet to accelerate the metal sheet toward the wire to obtain metallurgical bonding. A series of experiments were implemented to validate the welding ability of Al sheet/Cu wire and Al sheet/Ag wire. It was found that...

Cold Forming Stainless Steel Bar and Wire