Cold sprayed metal-ceramic coatings using satellited powders
نویسندگان
چکیده
منابع مشابه
Microstructure and Microwave Absorption Properties of Flame Sprayed Ceramic Coatings
In this research work, airplane grade aluminum alloy substrate was coated by Al2O3/ TiO2 ceramic coatings in two different compositions as 50:50 and 87:13 using Flame spraying technique. The surface & cross-sectional morphological characterizations of the Al2O3/ TiO2 powders and coatings were performed by scanning electron microscopy (SEM). The microwave absorbing properties of coatings were ex...
متن کاملCorrosion Protection of Metallic Waste Packages Using Thermal Sprayed Ceramic Coatings
Ceramic coated carbon steel coupons were corrosion tested in water with dissolved salts to simulate exposure to evaporation concentrated groundwater in an underground nuclear repository. Metallography revealed no corrosion at the ceramic metal interface of dense coatings, even though electrical measurements demonstrated that the coatings were slightly porous. Experimental results and a model to...
متن کاملBio-ceramic Composite Coatings by Cold Spray Technology
Bioceramics such as hydroxyapatite (HAP) have been conventionally deposited by plasma spray technique. However, due to the inherent high temperature in the plasma, deleterious effects such as evaporation, phase alteration, residual stress, debonding, and gas release etc., commonly occur in these coatings. This paper presents a novel approach to deposit bioceramic coatings at temperatures well b...
متن کاملBond Strength of Plasma Sprayed Ceramic Coatings on the Phosphated Steels
P. Pokorny, L. Mastny, V. Sykora, Institute of Chemical Technology Prague, Czech Republic Z. Pala, V. Brozek, Institute of Plasma Physics ASCR v.v.i. Prague, Czech Republic In the presented work, results of adhesion measurements for different systems of steel sheet-phosphate interlayerceramic coating are described. The interlayers were produced by zinc phosphating; alumina, olivine and zirconia...
متن کاملDetermination of nonlinear properties of thermal sprayed ceramic coatings via inverse analysis
A robust procedure to estimate nonlinear mechanical properties of thermally sprayed (TS) ceramic coatings is introduced. Such a method is valuable particularly for TS coatings since each may possess unique properties depending upon its processing condition. Traditionally, their responses have been assumed as linear elastic (isotropic or anisotropic) except in very high temperature environments ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Letters
سال: 2017
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2017.03.175