Cold Spray Technology to Promote Conductivity of Short Carbon Fiber Reinforced Polyether-Ether-Ketone (PEEK)
نویسندگان
چکیده
منابع مشابه
Mean strain effects on cyclic deformation and fatigue behavior of polyether ether ketone (PEEK)
The fatigue behavior of polyether ether ketone (PEEK) thermoplastic was investigated under uniaxial strain-controlled cyclic loading condition with various mean strains (Rε 1⁄4 0, 0.2, and 0.25). The mean stress responses of PEEK from all mean strain fatigue tests were found to be fully-relaxed. As a result, minimum mean strain effect on fatigue behavior of PEEK was observed. Fractography analy...
متن کاملPEEK (Polyether-ether-ketone) Based Cervical Total Disc Arthroplasty: Contact Stress and Lubrication Analysis
This paper presents a theoretical analysis of the maximum contact stress and the lubrication regimes for PEEK (Polyether-ether-ketone) based self-mating cervical total disc arthroplasty. The NuNec(®) cervical disc arthroplasty system was chosen as the study object, which was then analytically modelled as a ball on socket joint. A non-adhesion Hertzian contact model and elastohydrodynamic lubric...
متن کاملReconstruction of frontal bone using specific implant polyether-ether-ketone.
Defects on the craniofacial complex may result in aesthetic defects, functional damage, and psychologic consequences. Previously, surgeons showed no interest in reconstructing the operated area, but in the treatment of the problem, leaving bone contour is a secondary issue. Nowadays, area reconstruction with post-reestablishment of contour and local shape has become one of the surgeon's priorit...
متن کاملLocal deformation behavior of surface porous polyether-ether-ketone.
Surface porous polyether-ether-ketone has the ability to maintain the tensile monotonic and cyclic strength necessary for many load bearing orthopedic applications while providing a surface that facilitates bone ingrowth; however, the relevant deformation behavior of the pore architecture in response to various loading conditions is not yet fully characterized or understood. The focus of this s...
متن کاملUse of infrared thermography to measure fiber orientation on carbon-fiber reinforced composites
Carbon-fiber reinforced composites are widely used in the industry. One of the key features regarding their quality and usefulness is related to the fiber orientation and contend. One technique that is used to test this kind of material is Infrared Thermography (IT). In this paper it is presented a technique based on diode-laser spot heating to measure fiber orientation on the surface of a carb...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Key Engineering Materials
سال: 2019
ISSN: 1662-9795
DOI: 10.4028/www.scientific.net/kem.813.459