Cold spray deposition of thermoplastic powder for road marking
نویسندگان
چکیده
منابع مشابه
Powder Stream Characteristics in Cold Spray Nozzles
The exponential increase of industrial demand in the past two decades has led scientists to the development of alternative technologies for the fast manufacturing of engineering components, aside from standard and time consuming techniques such as casting or forging. Cold Spray (CS) is a newly developed manufacturing technique, based upon the deposition of metal powder on a substrate due to hig...
متن کاملCold Spray Deposition of SS316L Powders on Al5052 Substrates and Their Potential Using for Biomedical Applications
The corrosion behaviour of 316L stainless steel coatings obtained by cold spray method was investigated in this study. 316L powders were deposited onto Al5052 aluminum substrates. The coatings were produced using nitrogen (N2) process gas. In order to further improve the corrosion and mechanical properties of the coatings, heat treatment was applied at 250 and 750 °C. The corrosion performances...
متن کاملAnalysis of the impact velocity of powder particles in the cold-gas dynamic-spray process
While built on a sound physical foundation, isentropic, one-dimensional models generally used to analyze the dynamics of dilute two-phase (feed-powder particles suspended in a carrier gas) flow during the cold-gas dynamic-spray process, require the use of numerical procedures to obtain solutions for the governing equations. Numerical solutions, unfortunately, do not enable an easy establishment...
متن کاملRoad-marking Analysis for Autonomous Vehicle Guidance
Driving an automobile autonomously on rural roads requires knowledge about the geometry of the road. Furthermore, knowledge about the meaning of each lane of the road is needed in order to decide which lane should be taken and if the vehicle can do a lane change. This paper addresses the problem of extracting additional information about lanes. The information is extracted from the types of roa...
متن کاملModeling Spray Pyrolysis Deposition
The deposition of a thin tin oxide film allows for the manufacture of modern gas sensors. Spray pyrolysis deposition is used to grow the required thin films, as it can be seamlessly integrated into a standard CMOS processing sequence. A model for spray pyrolysis deposition is developed and implemented within the Level Set framework. Two models for the topography modification due to spray pyroly...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: EPJ Web of Conferences
سال: 2019
ISSN: 2100-014X
DOI: 10.1051/epjconf/201922101006