Cold Rolling-, Precipitation-, and Recrystallization Textures of 15V-3Cr-3Al-3Sn Titanium Alloy Sheet
نویسندگان
چکیده
منابع مشابه
Statistical analysis on static recrystallization texture evolution in cold-rolled AZ31 magnesium alloy sheet.
Cast AZ31B-H24 magnesium alloy, comprising Mg with 3.27 wt% Al and 0.96 wt% Zn, was cold rolled and subsequently annealed. Global texture evolutions in the specimens were observed by X-ray diffractometry after the thermomechanical processing. Image-based microstructure and texture for the deformed, recrystallized, and grown grains were observed by electron backscattered diffractometry. Recrysta...
متن کاملRecrystallization textures and microstructures of Al-0.3%Cu alloy after deformation to high strains
An Al-0.3%Cu alloy was deformed to high strains by cold rolling. The as-deformed samples were annealed at different temperatures until complete recrystallization. The cold rolling textures were determined by X-ray diffraction while the recrystallization textures and microstructures were characterized by electron backscatter diffraction. It was found that the rolling texture was characterized by...
متن کاملTextures and Local Textures in Severely Cold - Rolled and Annealed Ultra - Fine - Grained FeCo Alloy
We find that a severely rolled FeCo alloy has anomalous enhancement of the rotated-cube {100}<011> texture component and a decrease of the {111} components after annealing, which is contrast to the recrystallization behaviors reported in traditional BCC metals and alloys. The local texture measurements show that two kinds of grains with obviously different orientations, i.e. {100} and {111}, ar...
متن کاملEffect of TiO2 nanoparticles on the bond strength of CP Ti sheet by cold Rolling method
In this work, the strength of cold roll bond of the commercially pure titanium (CP Ti) sheet and the effect of TiO2 nanoparticles on bond strength was investigated. Through the accumulative roll bonding process, which is considered among the important severe plastic deformation processes, the creation of suitable bonds plays a significance role in the ultimate strength of the bond. Thus, resear...
متن کاملEffect of Cold Rolling and Heat Treatment on the Mechanical Properties of GH4169 Alloy Sheet at Room Temperature
The mechanical properties of GH4169 alloy sheet after cold rolling (at 0%, 10%, 30%, 50% and 70%) and solid solution were investigated. The textures and Taylor factors were characterized using electron backscattering diffraction (EBSD). The fractions of δ phase were measured by X-ray diffraction. The contributions of δ phase, grain size, texture, and work hardening on the mechanical properties ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1989
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.75.12_2266