Cold Rolling Effects on Material Properties in Pallet Rack Uprights
نویسندگان
چکیده
منابع مشابه
Distortional Influence of Pallet Rack Uprights Subject to Combined Compression and Bending
A pallet rack is a structure in which the beams and uprights are cold-formed steel sections. The beam-upright connections are normally clipped in order to select the beam levels required and for ease of assembly. For this reason, the uprights contain holes and perforations distributed along their length. The complexity of these components, with local, distortional and torsional/flexural bucklin...
متن کاملEffects of Cold-Rolling/Aging Treatments on the Shape Memory Properties of Ti49.3Ni50.7 Shape Memory Alloy
In this study, the combined effects of strengthening, precipitates, and textures on the shape recovery ability and superelasticity of thermomechanically treated Ti49.3Ni50.7 shape memory alloy (SMA) in both the rolling and transverse directions were studied by experimental measurements and theoretical calculations. Experimental results and theoretical calculations showed that the 300 °C × 100 h...
متن کاملEffects of cold-rolling deformation on texture evolution and mechanical properties of Ti-29Nb-9Ta-10Zr alloy
The crystallographic texture of Ti–29Nb–9Ta–10Zr alloy is studied after cold-rolling with different amounts of thickness reduction, up to 60%. The major texture components developed during cold-rolling were: γ-fibre components: {111}〈 〉, {111}〈 〉, {111}〈 〉 and {111}〈 〉; texture component: {112}〈 〉 and texture components: {001}〈 〉 and {010}〈001〉. Besides crystallographic texture the resulted mec...
متن کاملInfluence of the cold work effects in perforated rack columns under pure compression load
This paper analyses the influence of residual stresses and strain hardening due to the cold rollforming process on the load carrying capacity of perforated rack columns. First of all, a residual strain distribution of the manufacturing process is obtained via a finite element analysis and then it is introduced in the model as initial state to carry out a nonlinear buckling analysis. Two differe...
متن کاملSize Effect on Mechanical Properties and Texture of Pure Copper Foil by Cold Rolling
To study the size effect on the properties of copper, tensile tests were performed with pure copper foil (thickness range from 25 μm to 300 μm) by cold rolling. A pronounced size effect was observed at a thickness of 76 μm. The results showed that ultimate strength increased as sample thickness decreased from 300 μm to 100 μm, however, this was decreased as the thickness changed from 76 μm to 2...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Open Civil Engineering Journal
سال: 2017
ISSN: 1874-1495
DOI: 10.2174/1874149501711010319