Cold Model Experiment on Infiltration of Mould Flux in Continuous Casting of Steel: Simple Analysis Neglecting Mould Oscillation
نویسندگان
چکیده
منابع مشابه
Looking into continuous casting mould
When you look into the continuous casting mould you can see very little. Consequently, steelmakers have had to rely on plant trials, simulation experiments and physical property measurements on fluxes and steels to gain an understanding of the mechanisms responsible for process problems and product defects. However, in recent years, mathematical modelling has advanced to the stage where they ca...
متن کاملAnalyzing the Failure of Master Mould in Casting of Copper Anode Moulds and Suggesting a more Suitable Metal Mould
Master moulds are used to cast copper anode moulds. These iron moulds are made of grey or nodular cast irons. According to desirable properties of ductile irons, it was expected that ductile cast iron ...
متن کاملEffect of mould expansion on pattern allowances in sand casting of steel
For steel castings produced in sand moulds, the expansion of the sand and have a significant impact on the final size and shape of the casting. Experiments are conducted using a cylindrical casting to study this effect for different sands (silica and zircon) and different sand binder systems (phenolic urethane and sodium silicate). The type of sand has a significant effect on the final casting ...
متن کاملPrediction of burn-on and mould penetration in steel casting using simulation
Burn-on and penetration defects in steel casting are principally caused by localised overheating of the sand mould or cores. Such overheating can cause liquid metal to compromise the mould surface and entrain onto the surface of the mould. A method has been developed to predict likely burn-on and penetration defect locations as part of a standard casting simulation. The method relies on determi...
متن کاملReview Article on Physical and Numerical Modelling of Sen and Mould for Continuous Slab Casting
Over the years, considerable efforts have been made to study the performance of Submerged Entry Nozzle (SEN) and mould of continuous slab caster. Numerous physical and numerical modelling studies have already been carried out and reported in the literature to study the fluid flow behaviour inside the mould. Based on the extensive literature search, a summary of these is presented here. For the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2006
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.46.250