Cold Extrusion of External Gear Having Borethrough Expansion of Inner Diameter
نویسندگان
چکیده
منابع مشابه
Numerical investigation of strain distribution during cyclic expansion extrusion (CEE)
Strain distribution of Al 1100 was numerically investigated during cyclic expansion extrusion (CEE) process using finite element method (FEM). Die angle, corner fillet radius and die chamber diameter were considered as die parameters and friction factor and number of passes as process parameters. The effects of these parameters were investigated on the effective strain and strain homogeneity in...
متن کاملNumerical and Experimental Investigation of Cold orBital Forging of a 16MnCr5 Alloy Spur Bevel Gear
The purpose of this research is to analyze the forging of bevel gears based on conventional forging method with material number 1.7131 with finite element method by means of SUPER FORGE software and to compare it with experimental cold orbital forging results.After doing simulation of conventional forging and obtaining press tonnage due to orbital forging method with DEFORM software, orbital fo...
متن کاملModelling of cold extrusion with experimental verification
This paper reports on an experimental and finite element analysis (FEA) of the cold extrusion of high-grade (AA1100) aluminium. The influence of die angle, reduction ratio and die land on the extrusion force during the extrusion process was investigated. A forward extrusion die was designed and manufactured for the purpose of the experimental research. Interchangeable elements of the extrusion ...
متن کاملSTUDIES CONCERNING NEW BALL-BEARINGS HAVING 35 mm THE INNER DIAMETER OF THE INTERNAL RING (part II)
The paper presents some aspects regarding the deflections of new construction of ball-bearings with 35mm the dimension of the inner diameter, providing from the standard construction of the 6305 ballbearing. Different constructions were obtained using an algorithm, having another internal geometry, other dimensions of the rings and other number of balls, in the way to obtain higher static or dy...
متن کاملExperimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure
It is generally known that severe plastic deformation processes with back pressure not only apply higher hydrostatic stress and more deformation compared to what a regular process can apply to a workpiece but also prevent surface defects in the workpiece during the process. Hydrostatic cyclic expansion extrusion (HCEE) was developed recently for processing long ultrafine-grained metals and allo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Technology of Plasticity
سال: 2012
ISSN: 0038-1586,1882-0166
DOI: 10.9773/sosei.53.140