Cogging force reduction in linear tubular flux switching permanent-magnet machines
نویسندگان
چکیده
منابع مشابه
Thrust Force Ripple Reduction of Two C-Core Linear Flux-Switching Permanent Magnet Machines of High Thrust Force Capability
Linear flux-switching permanent magnetic (LFSPM) machines are good choices for long stroke applications. These machines deliver high thrust force density in addition to the machine structure where permanent magnetics (PMs) and windings are all on the short mover. For LFSPM machines, their performance is always affected by big thrust force ripple. In this paper, for two C-core LFSPM machines of ...
متن کاملCogging Torque Reduction of Sandwiched Stator Axial Flux Permanent Magnet Brushless DC Motor using Magnet Notching Technique
Cogging torque reduction of axial flux permanent magnet brushless dc (PMBLDC) motor is an important issue which demands attention of machine designers during design process. This paper presents magnet notching technique to reduce cogging torque of axial flux PMBLDC motor designed for electric vehicle application. Reference axial flux PMBLDC motor of 250 W, 150 rpm is designed with 48 stator slo...
متن کاملDetent Force Reduction of a C-Core Linear Flux-Switching Permanent Magnet Machine with Multiple Additional Teeth
Abstract: C-core linear flux-switching permanent magnet (PM) machines (LFSPMs) are attracting more and more attention due to their advantages of simplicity and robustness of the secondary side, high power density and high torque density, in which both PMs and armature windings are housed in the primary side. The primary salient tooth wound with a concentrated winding consists of C-shaped iron c...
متن کاملMinimization of Cogging Force in Fractional-Slot Permanent Magnet Linear Motors with Double-Layer Concentrated Windings
Abstract: Permanent magnet linear motors (PMLMs) with double-layer concentrated windings generally show significant cogging forces due to the introduction of auxiliary teeth for eliminating the end-effect induced phase unbalance, even when the fractional-slot technology is applied. This paper presents a novel approach to reduce the cogging force by adjusting the armature core dimensions in frac...
متن کاملCogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Machines Using Hybrid Magnet Shapes
This paper deals with the magnet pole shape design for the minimization of cogging torque in permanent magnet synchronous machines (PMSM). New shapes of permanent magnet are proposed. The magnet shape is modeled analytically by a set of stacked and well dimensioned layers relatively to the height and opening angle. The final shape of magnet is configured by using three models in view of obtaini...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Open Physics
سال: 2018
ISSN: 2391-5471
DOI: 10.1515/phys-2018-0035