Cogging Force Reduction and Profile Smoothening Methods for a Slot-Spaced Permanent Magnet Linear Alternator
نویسندگان
چکیده
A Permanent Magnet Linear Alternator (PMLA) works seamlessly with a Free Piston Stirling Engine (FPSE) to convert short-stroke and high-frequency linear motion electric power. Cogging force is an unavoidable opposition acting on the translator, limiting from driving force, which shortens lifespan of machine, causing oscillatory power output increased maintenance costs. This research focuses methods reduce cogging translator slot-spaced PMLA by making geometrical changes structure machine. The profile made be in line displacement avoid unnecessary vibrations damaging piston FPSE. also influence induced voltage. Bringing balance between reduced voltage minor sinusoidal outcome this work.
منابع مشابه
Minimization of Cogging Force in Fractional-Slot Permanent Magnet Linear Motors with Double-Layer Concentrated Windings
Abstract: Permanent magnet linear motors (PMLMs) with double-layer concentrated windings generally show significant cogging forces due to the introduction of auxiliary teeth for eliminating the end-effect induced phase unbalance, even when the fractional-slot technology is applied. This paper presents a novel approach to reduce the cogging force by adjusting the armature core dimensions in frac...
متن کاملDetent Force Analysis and Optimization for Vertical Permanent-magnet Linear Synchronous Motor with Fractional-slot Windings
This paper investigates the detent force modeling and optimization of a iron-core type 16-pole 15-slot permanent magnet linear synchronous motor (PMLSM) for ropeless elevator applications. Variable network non-linear magnetic equivalent circuit (VNMEC) model is established to predict the detent force of PMLSM. The topology structure of equivalent magnetic circuit is developed and the permeance ...
متن کاملMinimization of Cogging Force in a Stationary Discontinuous Armature Linear Permanent Magnet Motor at the Outlet Edge
Generally, the discontinuous armature permanent magnet linear synchronous motor (PM-LSM) is composed by the stator block (accelerator, re-accelerator, and decelerator) and the free running section. However, the stationary discontinuous armature design involves the velocity variation of the mover during drive when the armature’s non-installation part changes over to installation part as a result...
متن کاملCogging Torque Reduction of Sandwiched Stator Axial Flux Permanent Magnet Brushless DC Motor using Magnet Notching Technique
Cogging torque reduction of axial flux permanent magnet brushless dc (PMBLDC) motor is an important issue which demands attention of machine designers during design process. This paper presents magnet notching technique to reduce cogging torque of axial flux PMBLDC motor designed for electric vehicle application. Reference axial flux PMBLDC motor of 250 W, 150 rpm is designed with 48 stator slo...
متن کاملOptimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force
In the permanent magnet linear synchronous motor (PMLSM), force ripple is harmful, useless and disturbing. The force ripple is basically composed of two components: detent force and mutual force ripple. This force is influenced by the geometric parameters of the permanent magnet (PM) motors; such as width, thickness and length of the magnet poles, length and thickness of the rotor and stato...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2023
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en16155827