Coding Mask Design for Single Sensor Ultrasound Imaging
نویسندگان
چکیده
منابع مشابه
Compressive 3D ultrasound imaging using a single sensor
Three-dimensional ultrasound is a powerful imaging technique, but it requires thousands of sensors and complex hardware. Very recently, the discovery of compressive sensing has shown that the signal structure can be exploited to reduce the burden posed by traditional sensing requirements. In this spirit, we have designed a simple ultrasound imaging device that can perform three-dimensional imag...
متن کاملSingle-mask Thermal Displacement Sensor in Mems
In this work we describe a one degree-of-freedom microelectromechanical thermal displacement sensor integrated with an actuated stage. The system was fabricated in the device layer of a silicon-on-insulator wafer using a single-mask process. The sensor is based on the temperature dependent electrical resistivity of silicon and the heat transfer by conduction through a thin layer of air. On a me...
متن کاملDesign, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging
This paper presents a new robotic mechanism for ultrasound imaging. The device is placed on a patient's body by an operator, and an ultrasound expert controls the motions of the device to obtain ultrasound images. The paper focuses on the robotic mechanism that performs ultrasound imaging. The design of the mechanism is based on two approaches to produce center of motion for an ultrasound probe...
متن کاملPinhole Mask Sensor a Pinhole Mask Sensor
Figure 1 shows an example of a light field camera with a pinhole mask in front of the sensor. If we look at the sensor in 1D and assume an total x-resolution of 900 pixels and a Θ resolution of 9, the local x resolution is 100. The disadvantages are therefore a loss in resolution and a loss of light, as most of the light gets blocked by the mask. Therefore, while this model is very clean on a t...
متن کاملLimits of imaging-system simplification using cubic mask wavefront coding.
Increasing the space-bandwidth product of an imaging system will lead to a complex and expensive optical system. Techniques exist to simplify imaging systems. We propose the use of a hybrid imaging system using pupil phase modulation. Based on the reconstructed image's mean-squared error, we compute how this error is affected under various third-order aberrations. We determine the best cubic ph...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Computational Imaging
سال: 2020
ISSN: 2333-9403,2334-0118,2573-0436
DOI: 10.1109/tci.2019.2948729