Coalescence of dry foam under water injection
نویسندگان
چکیده
منابع مشابه
Sustaining dry surfaces under water
Rough surfaces immersed under water remain practically dry if the liquid-solid contact is on roughness peaks, while the roughness valleys are filled with gas. Mechanisms that prevent water from invading the valleys are well studied. However, to remain practically dry under water, additional mechanisms need consideration. This is because trapped gas (e.g. air) in the roughness valleys can dissol...
متن کاملAnomalous coalescence in sheared two-dimensional foam.
We report an experimental study on shearing a monolayer of monodisperse bubbles floating on liquid in a narrow-gap Couette device. The bubbles in such a "bubble raft" coalesce only if the shear rate exceeds a threshold value. This is in contrast to the conventional wisdom that bubbles and drops coalesce for gentler collisions, at shear rates below a critical value. Furthermore, the threshold sh...
متن کاملVertex-Based Simulation of Dry Foam
Foam dynamics is gaining interests within Computational Fluid Dynamics and Computer Graphics. We believe that liquid foam, or froth, is the next evolution in the field of fluid dynamics. Froth is the natural phenomenon of bubbles that arise due to nucleation of gas in liquids. As the physics of foams in two dimensions is better understood this thesis begins the journey of physics-based foam dyn...
متن کاملLocal stress relaxation and shear banding in a dry foam under shear.
We have developed a realistic simulation of 2D dry foams under quasistatic shear. After a short transient, a shear-banding instability is observed. These results are compared with measurements obtained on real 2D (confined) foams. The numerical model allows us to exhibit the mechanical response of the material to a single plastication event. From the analysis of this elastic propagator, we prop...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Soft Matter
سال: 2014
ISSN: 1744-683X,1744-6848
DOI: 10.1039/c4sm00476k