Coagulation of reactive red 195 dye by using polyaluminium chloride as coagulant
نویسندگان
چکیده
This research aims to examine the efficiency of Polyaluminium Chloride (PAC) remove a reactive red 195 dye and find optimal condition coagulate this dye. In present investigation, effect pH (3-9) PAC dosages (500-5,000 mg/L) were studied 1,000 mg/L using jar test. The results showed that variations influenced PAC. With increase dosage, 500- 1,500 5,000 highest percentage colour removal in acidic pH, while 2,000 3,000 alkaline pH. was 99.47% at condition. These show is an effective coagulant RR195 coagulation process for dosage 9.
منابع مشابه
Comparison of a novel polytitanium chloride coagulant with polyaluminium chloride: coagulation performance and floc characteristics.
Polymerized inorganic coagulants are increasingly being used in the water supply and wastewater treatment process, yet there is limited research on the development of polytitanium coagulants. The aim of this study is to synthesize polytitanium chloride (PTC) coagulants and investigate their coagulation behavior and floc characteristics for humic acid removal in comparison to polyaluminum chlori...
متن کاملEffects of pH and Coagulant Dosage on Effectiveness of Coagulation of Reactive Dyes from Model Wastewater by Polyaluminium Chloride (PAC)
This study measures the influence of pH and polyaluminium chloride (PAC) dosage on the effectiveness of reactive dyes removal. Experiments were carried out for turquoise DG, red DB-8, orange OGR and black DN. The pH was changed from 3.5 to 7.0 and the dosages of PAC from 0.3 to 4.0 mg Al/mg dye. The degree of dyes removal depended on pH and dosage of coagulant. In the pH range from 4.0 to 5.5 t...
متن کاملAdsorption Rate of 198 Reactive Red Dye from Aqueous Solutions by using Activated Red Mud
Backgroud and purpose: Dye is one of the problems of industrial effluent such as textile industries. The dyes can be removed by various methods. Therefore, the aim of this study was the evaluation of adsorption rate of reactive red 198 from aqueous solution by activated red mud. Materials and methods: This research was a lab study. Activated red mud was used as an adsorbent to remove reactive r...
متن کاملPreparation and coagulation efficiency of polyaluminium ferric silicate chloride composite coagulant from wastewater of high-purity graphite production.
The aim of the present work was to produce a polyaluminium ferric silicate chloride (PAFSiC) coagulant from acidic and alkaline wastewater of purifying graphite by roasting, and subsequently to evaluate coagulation efficiency of the reagent by treating surface water from the Yellow River as well as municipal wastewater in comparison with the conventional coagulant polyaluminium chloride (PAC). ...
متن کاملRemoval of Reactive Red 24 Dye by Clean Electrocoagulation Process using Iron and Aluminum Electrodes
In this research, the efficiency of electrocoagulation treatment process using iron and aluminum electrodes to treat synthetic wastewater containing Reactive Red 24 (RR 24) was studied. The effects of parameters such as current density, pH, type of electrolyte, initial dye concentration, electrolyte concentration, temperature, and inter electrode distance on dye removal efficiency were investig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nucleation and Atmospheric Aerosols
سال: 2021
ISSN: ['0094-243X', '1551-7616', '1935-0465']
DOI: https://doi.org/10.1063/5.0066312