Coagulated Mineral Adsorbents for Dye Removal, and Their Process Intensification Using an Agitated Tubular Reactor (ATR)

نویسندگان

چکیده

The aim of this study was to understand the efficacy widely available minerals as dual-function adsorbers and weighter materials, for removal toxic azo-type textile dyes when combined with coprecipitation processes. Specifically, adsorption an anionic direct dye measured on various mineral types without secondary coagulation iron hydroxide (‘FeOOH’) in both a bench-scale stirred tank, well innovative agitated tubular reactor (ATR). Talc, calcite modified bentonite were all able remove 90–95% at 100 200 ppm concentrations, where kinetics fitted pseudo second-order rate model rapid (<30 min). Physical characterisation composite mineral-FeOOH sludges also completed through particle size sedimentation measurements, elemental scanning electron microscopy determine homogeneity coagulated structure. Removal >99% achieved systems, additionally, they produced significantly enhanced settling rates bed compression. greatest (9 mm min?1) solids content increase (450% w/w) observed calcium carbonate system, which displayed most homogenous distribution. This system selected scale-up benchmarking ATR. Dye sediment dispersion ATR respect bench scale tests, although lower due relatively high shear agitator. Overall, results highlight applicability these cost-effective sludge separation modifiers accelerate compression water treatment. Additionally, work indicates suitability flexible, modular alternative traditional tank reactors.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electrochemical Regeneration of Various Graphitic Adsorbents in an Air Agitated Sequential Batch Reactor

With the aim to address the issues related to the regeneration of activated carbon used for wastewater treatment, a novel and state of the art water treatment technology (Arvia) was introduced at the University of Manchester, UK. This technology employs the adsorption of dissolved toxic pollutants present in water onto the surface of graphitic adsorbents followed by their quick and cheap electr...

متن کامل

Ionic liquid synthesis in a microstructured reactor for process intensification

A. Renken b,∗, V. Hessel a,c, P. Löb a, R. Miszczuk b, M. Uerdingen d, L. Kiwi-Minsker b a Institut für Mikrotechnik Mainz GmbH, Carl-Zeiss-Str. 18-20, D-55129 Mainz, Germany b Ecole Polytechnique Fédérale de Lausanne, SB-ISIC-GGRC-Station 6, CH-1015 Lausanne, Switzerland c Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, The Netherlands d Solvent Innovation GmbH, Nattermann...

متن کامل

Comparative Studies of Physical Characteristics of Raw and Modified Sawdust for Their Use as Adsorbents for Removal of Acid Dye

The present paper aims to investigate the physical characteristics of sawdust relative to its use as an adsorbent for removal of an acid dye (Orange G) from aqueous solutions. The raw sawdust was sieved to have a uniform size and was activated by sulphuric acid by refluxing the content at 60 C for 4 h. Surface morphology and surface functional groups of both raw and modified sawdust samples wer...

متن کامل

Removal of Malachite Green Dye from Waste Water by Using Natural and Synthetic Adsorbents: a Review

Contaminated water is the primary source of any disease. Water may be contaminated by number of pollutants and dyes are one of them. Malachite green (MG) dye is widely used as biocide in the aquaculture industry to controls fungal attacks, protozoan infections and also used in food and textile industries for various purposes. Surface and ground water is contaminated with dyes due to discharge o...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: ChemEngineering

سال: 2021

ISSN: ['2305-7084']

DOI: https://doi.org/10.3390/chemengineering5030035