CO2 capture using aqueous ammonia: kinetic study and process simulation
نویسندگان
چکیده
منابع مشابه
Simulation of Co2 Capture Process
Carbon dioxide capture process has been simulated and studied under different process conditions. It has been shown that several process parameters such as lean amine temperature, number of adsorber stages, number of stripper stages and stripper pressure affect different process conditions and outputs such as carbon dioxide removal and reboiler duty. It may be concluded that the simulation of c...
متن کاملThe Kinetic and Thermodynamic Study for Decolorization of Congo red from Aqueous Solution Using Electrocoagulation Process
The removal of color from synthetic wastewater containing Congo red was experimentally investigated using electrocoagulation process. The effects of operational parameters such as current density, electrolysis time, electrolyte concentration, electrode distance, initial dye concentration, initial pH and temperature on color removal efficiency were investigated in this study. The tentative resul...
متن کاملThe efficiency of modified powdered activated carbon for removal of ammonia nitrogen from aqueous solution: a process optimization using RSM (Response Surface Methodology), adsorption isotherm and kinetic study
The objective of this study was to determine the performance of modified commercial powdered activated carbon (MCPAC) in removal of ammonia from aqueous solution. The effects of adsorbent dosage (0.5–1.5 g/L), ammonia concentration (100–200 mg/L), pH (3 to 9) and contact time (2 to 120 min) were examined. In this study, experiments were performed based on Response Surface Methodology (RSM). The...
متن کاملOptimization of CO2 capture process with aqueous amines using response surface methodology
Amine is one of candidate solvents that can be used for CO2 recovery from the flue gas by conventional chemical absorption/desorption process. In this work, we analyzed the impact of different amine absorbents and their concentrations, the absorber and stripper column heights and the operating conditions on the cost of CO2 recovery plant for post-combustion CO2 removal. For each amine solvent, ...
متن کاملProcess Design of Aqueous Ammonia - based Post - combustion CO 2 Capture
In the present work, the aqueous ammonia-based post-combustion CO2 capture (PCC) process is simulated using the rate-based model in Aspen Plus, by which the method of sizing column heights is revealed. The heights of the staged CO2 absorbers and the NH3 absorber are determined as 5 m, 6 m, and 6 m; in addition, the heights of the CO2 and NH3 strippers are 12 m and 6 m, respectively. It is well ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2011
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2011.02.010