CO2 capture from syngas using solid CO2 sorbent and WGS catalyst
نویسندگان
چکیده
منابع مشابه
Advanced Modeling and Control of a Solid Sorbent-Based CO2 Capture Process
Solid sorbent-based CO2 capture from flue gas provides a novel alternative to traditional solvent-based processes due to potentially lower energy consumption for regeneration. Optimal operation of such a gas-solid flow process requires an advanced control framework for efficient disturbance rejection and setpoint tracking. This work focuses on the development of computationally fast and accurat...
متن کاملNitrogen enriched solid sorbents for CO2 capture
Reducing anthropogenic CO2 emissions to slow down the consequences of climate change concerns all developed countries. In the short term, one of the most viable options to cut down carbon emissions consists on CO2 capture and storage from large stationary sources such as power stations, cement plants, refineries, etc. The near-ready-to-use technology at this scale is amine scrubbing. However, i...
متن کاملSyngas from CO2 Reforming of Coke Oven Gas: synergetic effect of activated carbon / Ni-γAl2O3 Catalyst
The CO2 reforming of coke oven gas for the production of synthesis gas has been studied over an activated carbon, an in-lab prepared Ni/Al2O3 catalyst and physical mixtures of both materials in different proportions (AC+Ni) at 800 oC. It was found that there are two possible coexisting reaction pathways: the direct dry reforming of methane (decomposition of methane followed by gasification of t...
متن کاملFischer-Tropsch synthesis using bio-syngas and CO2
While Fischer-Tropsch synthesis (FTS) using coal and natural gas in conventional reactors is an almost well-established technology, the production of liquid hydrocarbons from syngas obtained from biomass is in its preliminary stages of commercialization in countries like Germany. With concerns about global warming and ways of disposing of CO2 being searched for, CO2 hydrogenation using FTS to l...
متن کاملDevelopment of New Potassium Carbonate Sorbent for CO2 Capture under Real Flue Gas Conditions
In this paper, the development of a new potassium carbonateon alumina support sorbent prepared by impregnating K2CO3 with an industrial grade of Al2O3 support was investigated. The CO2 capture capacity was measured using real flue gas with 8% CO2 and 12% H2O in a fixed-bed reactor at a temperature of 65 °C using breakthrough curves. The developed sorbent showed an adsorption capacity of 66.2 mg...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2011
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2011.01.165