Co-simulation platform for interconnected power systems and communication networks based on PSS/E and OMNeT++
نویسندگان
چکیده
This paper proposes a co-simulator that combines OMNeT++ for communication systems with PSS/E the electrical transmission network. The applies an event-driven synchronization method minimizes errors due to delays in between both simulators. pauses simulation of power system at each event, while supervisory module returns control event simulator if any condition from pre-specified set is met. proposed demonstrated on protection based peer-to-peer and used evaluate effect latency times online state estimator.
منابع مشابه
application of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولOn DC-Segmentation of Interconnected Power Systems
The ultimate goal of power system operation and planning is to increase power system reliability which enforces interconnected operation of power system. As a result of power system interconnection, the inter-area oscillation under different disturbances may cause power system partial or total blackout. DC-segmentation of interconnected power systems is a solution in which the topology of the n...
متن کاملCross-platform protocol development based on OMNeT++
Software development for wireless sensor networks can be accomplished with dedicated operating systems such as Contiki or TinyOS. However, protocol design and verification as well as debugging is still challenging. On the other hand, high-level simulation environments, e.g., OMNeT++, allow convenient and rapid development, but the resulting code has to be re-implemented for a particular hardwar...
متن کاملon dc-segmentation of interconnected power systems
the ultimate goal of power system operation and planning is to increase power system reliability which enforces interconnected operation of power system. as a result of power system interconnection, the inter-area oscillation under different disturbances may cause power system partial or total blackout. dc-segmentation of interconnected power systems is a solution in which the topology of the n...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computers & Electrical Engineering
سال: 2022
ISSN: ['0045-7906', '1879-0755']
DOI: https://doi.org/10.1016/j.compeleceng.2022.108092