Co-Optimizing Enhanced Oil Recovery and CO2 Storage by Simultaneous Water and CO2 Injection

Increasing CO2 Storage in Oil Recovery

Carbon dioxide (CO2) injection has been used as a commercial process for enhanced oil recovery (EOR) since the 1970’s. Because the cost of oil recovered is closely linked to the purchase cost of the CO2 injected, considerable reservoir engineering design effort has gone into reducing the total amount of CO2 required to recover each barrel of oil. If, on the other hand, the objective of the CO2 ...

An Experimental Study of Surfactant Alternating CO2 Injection for Enhanced Oil Recovery of Carbonated Reservoir

Core flooding experiments were conducted with the objective of evaluating near miscible surfactant alternating CO2 injection and the effect of surfactant concentrations on gas-oil and water displacements in porous media. The core samples were provided from a low permeability mixed wet oil reservoir at 156 °F and 1900 psia. In addition, very few studies of surfactant adsorption on car...

Enhanced Oil Recovery and CO2 Flooding/Sequestration in Carbonates

CO2 EOR and Storage in Oil Reservoirs

CO2 EOR and Storage in Oil Reservoirs — CO2 injection into tertiary oil reservoirs has been widely accepted as an effective technique for enhanced oil recovery (EOR), and has been used by the oil industry for over 40 years. Concerns over greenhouse gas emissions are leading to the investigation and realisation of its potential as a carbon storage method in recent years. With the right reservoir...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...