CMOS-integrable Ultrathin SnO2 Layer for Smart Gas Sensor Devices
نویسندگان
چکیده
منابع مشابه
Fully inkjet printed SnO2 gas sensor on plastic substrate
A tin dioxide (SnO2) sensor was fabricated by inkjet printing onto polyimide foil. Gold electrodes and heater were printed on each side of the substrate. A SnO2 based ink was developed by sol-gel method and jetted onto the electrodes. A final annealing at 400°C compatible with the polymeric transducers allowed to synthetize the SnO2 sensing film. Electrical measurements were carried out to char...
متن کاملSnO2/Pt Thin Film Laser Ablated Gas Sensor Array
A gas sensor array was developed in a 10 × 10 mm(2) space using Screen Printing and Pulse Laser Ablation Deposition (PLAD) techniques. Heater, electrode, and an insulator interlayer were printed using the screen printing method on an alumina substrate, while tin oxide and platinum films, as sensing and catalyst layers, were deposited on the electrode at room temperature using the PLAD method, r...
متن کاملSmart CMOS image sensor for lightning detection and imaging.
We present a CMOS image sensor dedicated to lightning detection and imaging. The detector has been designed to evaluate the potentiality of an on-chip lightning detection solution based on a smart sensor. This evaluation is performed in the frame of the predevelopment phase of the lightning detector that will be implemented in the Meteosat Third Generation Imager satellite for the European Spac...
متن کاملUltrathin SnO2 nanosheets: Oriented attachment mechanism, nonstoichiometric
We successfully synthesized large-scale and highly pure ultrathin SnO2 nanosheets (NSs), with a minimum thickness in the regime of ca. 2.1 nm as determined by HRTEM and in good agreement with XRD refinements and AFM height profiles. Through TEM and HRTEM observations on time-dependent samples, we found that the asprepared SnO2 NSs were assembled by “oriented attachment” of preformed SnO2 nanopa...
متن کاملDemo Abstract: Smart Cross-layer Framework for Wireless Sensor Networks
This work introduces a smart cross-layer architecture composed of a battery-less smart solar power system, a simple configurable power-aware MAC protocol, and an intelligent fuzzy-logic based autonomous configuration protocol. The design of the proposed protocols is derived from the fundamental principles of complementary areas, namely: electronics, protocol engineering, and artificial intellig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2012
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2012.09.191