Closed-die forging process of copper alloy valve body: finite element simulation and experiments
نویسندگان
چکیده
منابع مشابه
Optimization of Flash, Billet Dimensions and Friction Factor in Closed Die Cold Forging Process
Three important parameters in designing a closed die for forging process are ratio of width to flash thickness, ratio of height to billet diameter and the friction factor. In this paper the influences of these parameters on the required force for the forging and percentage of die filling were investigated. It was found that by controlling the flash dimension, the material loss is reduced and t...
متن کاملsimulation of orthogonal machining process of titanium alloy (ti-6al-4v) by finite element method
0
متن کاملSimulation Of Phase Transformation In Hot Forging Dies During A Precision Forging Process By Means Of Finite- Element-Analysis
The Finite-Element-Analysis (FEA) is of major importance for the design and improvement of forging processes. In this field, FEA is traditionally used to predict die fill, residual stresses and forming forces. The intention of the work presented in this paper is the development of an advanced simulation model for the description of phase transformation processes in forging dies based on FEA. Th...
متن کاملThe Simulation and Experimental Investigation to Study the Strain Distribution Pattern during the Closed Die Forging Process
Abstract—Closed die forging is a very complex process, and measurement of actual forces for real material is difficult and time consuming. Hence, the modelling technique has taken the advantage of carrying out the experimentation with the proper model material which needs lesser forces and relatively low temperature. The results of experiments on the model material then may be correlated with t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research and Technology
سال: 2021
ISSN: 2238-7854
DOI: 10.1016/j.jmrt.2020.12.087