Closed Die Forging Geometrical Parameters Optimization for Al-MMC
نویسندگان
چکیده
منابع مشابه
Optimization of Flash, Billet Dimensions and Friction Factor in Closed Die Cold Forging Process
Three important parameters in designing a closed die for forging process are ratio of width to flash thickness, ratio of height to billet diameter and the friction factor. In this paper the influences of these parameters on the required force for the forging and percentage of die filling were investigated. It was found that by controlling the flash dimension, the material loss is reduced and t...
متن کاملAn Upper Bound Solution for Closed Die Forging of Sintered Polygon
The paper reports on an investigation into the various aspects of closed die cold forging of polygonal powder preforms, which have been compacted and sintered from atomized powder. It is found that for certain dimensional ratios of the preform the die pressure is minimum. An attempt has been made for the determination of the die pressures developed for given geometries of the disc during the cl...
متن کاملNumerical Simulation of Hot Closed Die Forging of a Low Carbon Steel Coupled with Microstructure Evolution
Hot closed die forging is a regular process applied to manufacture metallic components used in supporting and fixing cable conductors in electric power transmission lines. In this forming process, the final microstructure of the workpiece depends on the control of several processing parameters. In this study, simulation of the industrial forging process of a ball hook component was performed us...
متن کاملClose-die Flashless Forging in Automotive Industry
This paper describes the possibilities and conditions of the closed-die flashless forging process using conventional mechanical presses and equipment. The technique of driven gear forging with an internal flash or with special die design has been developed. The quality of forgings is comparable to that achievable on Hatebur presses. Furthermore the problem of how to increase shift production un...
متن کاملOptimization Design of Flash Structure for Forging Die Based on Kriging-PSO Strategy
The article concern the influences of the novel flash structure with resistance wall on the forming load and die wear during the closed-die forging process. If the geometrical parameters of the resistance wall are not properly designed, the forming load and die wear may be great; this can affect the life of the forging die. Yet, no procedure is known to optimize and decide this flash structure ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: American Journal of Engineering and Applied Sciences
سال: 2008
ISSN: 1941-7020
DOI: 10.3844/ajeassp.2008.1.6