Clean solid biofuel production from high moisture content waste biomass employing hydrothermal treatment
نویسندگان
چکیده
منابع مشابه
Biofuel Production from Biomasses, Municipal Solid Waste and Sewage Sludge
The aim of this research line is to study and optimize the production of biofuels through the anaerobic digestion (AD) of organic waste (biohydrogen and biomethane) and the exploitation of lipid-rich biomasses and waste matrices (biodiesel). The research on anaerobic digestion has the following goals: a) the study of the biomethanization of unconventional waste matrices, such as algae, municipa...
متن کاملHydrothermal Treatment of Municipal Solid Waste to Produce Solid Fuel
This paper describes the application of innovative hydrothermal technology on local municipal solid waste (MSW) to produce low chlorine content solid co-firing fuel with coal. Raw MSW was treated at temperatures ranging from 210 to 235°C with 30 to 90 minutes holding period. The process yielded slump products which were then naturally dried to 5% moisture content, resulted in dry products with ...
متن کاملPolyhydroxyalkanoates production from waste biomass
Polyhydroxyalkanoates (PHAs) is a group of biopolymers that are extensively researched for such purpose due to the biocompatibility with mammal tissue and similar properties with conventional plastic. However, commercialization of PHA is impended by its high total production cost, which half of it are from the cost of pure carbon source feedstock. Thus, cheap and sustainable feedstocks are pref...
متن کاملBiodiesel Oil Derived from Biomass Solid Waste
Oils of a significant value both as fuels as well as for cosmetic applications can be extracted from the fruits of the jojoba plant. After extracting the oil, the remains of the fruit can still be further utilized as a solid fuel in furnaces or feedstock to animals. In the present work, the solid waste jojoba remains have been processed chemically to extract more biodiesel oil. The physical and...
متن کاملHigh efficiency power production from biomass and waste
Two-stage gasification allows power production from biomass and waste with high efficiency. The process involves pyrolysis at about 550°C followed by heating of the pyrolysis gas to about 1300°C in order to crack hydrocarbons and obtain syngas, a mixture of H2, CO, H2O and CO2. The second stage produces soot as unwanted by-product. Experimental results are reported on the suppression of soot fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Energy
سال: 2014
ISSN: 0306-2619
DOI: 10.1016/j.apenergy.2014.06.038