CLAY BEHAVIOUR UNDER CONSEQUTIVE LONG-TERM CYCLIC LOADING IN DIRECT SIMPLE SHEAR TESTS
نویسندگان
چکیده
منابع مشابه
Simulation of Cyclic Direct Simple Shear Loading Response of Soils Using Discrete Element Modeling
The Direct Simple Shear (DSS) test is one of the laboratory element testing devices that has been widely used to assess soil behavior. Although the DSS test is considered to simulate the cyclic shear loading mode from the earthquakes in an effective manner, the most commonly used versions of the test device (such as the NGI-type DSS device) do not provide means of measuring the lateral stresses...
متن کاملMicromechanics of soil responses in cyclic simple shear tests
Offshore wind turbine (OWT) foundations are subjected to a combination of cyclic and dynamic loading arising from wind, wave, rotor and blade shadowing. Under cyclic loading, most soils change their characteristics including stiffness, which may cause the system natural frequency to approach the loading frequency and lead to unplanned resonance and system damage or even collapse. To investigate...
متن کاملComparison of Radial Consolidation Behavior of Clay under Three Types of Cyclic Loading
Vertical drains and stone columns which have been used in infrastructure construction for highways, ports, coastal regions, etc., provide significant benefits for improving soil characteristics such as reducing the drainage length and accelerating the consolidation process. So the investigation of the radial consolidation is inevitable. Soils may be subjected to cyclic loading such as silos, ta...
متن کاملMechanical behaviour of TWIP steel under shear loading
Twinning induced plasticity steels (TWIP) are very good candidate for automotive industry applications because they potentially offer large energy absorption before failure due to their exceptional strain hardening capability and high strength. However, their behaviour is drastically influenced by the loading conditions. In this work, the mechanical behaviour of a TWIP steel sheet sample was in...
متن کاملBehaviour of Corroded Stud Shear Connectors under Fatigue Loading
Experimental investigation was conducted on corroded composite push-out specimens to study the behavior of shear studs subjected to fatigue loading. A total of eight standard EC4 push-out specimens were tested. The expected corrosion rate of test specimens ranged from 0 to 50%. The main purpose of these tests was to determine the fatigue life and the reduction effect caused by the corrosion on ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshu
سال: 1991
ISSN: 0289-7806,1882-7187
DOI: 10.2208/jscej.1991.439_9