CIRCULARLY POLARIZED ARRAY ANTENNA USING THE SEQUENTIAL ROTATION NETWORK FEEDING FOR X-BAND COMMUNICATION
نویسندگان
چکیده
منابع مشابه
Broadband Circularly Polarized Slot Antenna Array Using a Compact Sequential-Phase Feeding Network
A broadband circularly polarized (CP) slot antenna array fed by an asymmetric coplanar waveguide (CPW) with stepped and inverted T-shaped strips is proposed. Using four square slot antenna elements with sequential rotation oblique feed and a modified sequential-phase (SP) feeding network, broadband CP can be achieved. The measured −10 dB reflection coefficient bandwidth and 3 dB axial ratio (AR...
متن کاملCircularly Polarized Circular Slot Antenna Array Using Sequentially Rotated Feed Network
This paper presents the design, simulation, and measurement of two low-cost broadband circularly polarized (CP) printed antennas: a single element and an array at C band. The proposed single element antenna is excited by an L-shaped strip with a tapered end, located along the circular-slot diagonal line in the back plane. From the array experimental results, the 3 dB axial ratio bandwidth can r...
متن کاملDual-Band Circularly Polarized Antenna with Differential Feeding
A dual-band circularly polarized antenna is presented in this paper. A rectangular patch antenna with gap-feeding structure is firstly designed, and 3-dB axial-ratio bandwidth from 2.35 to 2.48GHz is obtained. A parasitic square ring is placed on the rear of the rectangular patch as a band-notch unit operating around 2.4 GHz. Then an original wide circularly polarized band is split into two ban...
متن کاملWide-Beamwidth Circularly Polarized Antenna and Its Application in a Sequential-Rotation Array with Enhanced Bandwidth
A wide-beamwidth circularly polarized (CP) asymmetric microstrip antenna is proposed by etching four novel unequal fan-shaped notches at the vertexes of the square radiator. A bandwidth of 1.5% and beamwidth of 156◦ are well achieved for an axial-ratio ≤ 3 dB (3-dB AR) at the central frequency of 1.575GHz. To widen the bandwidth, the asymmetric microstrip antenna is further expanded with the co...
متن کاملDesign, simulation and Fabrication of Circularly Polarized Fabry-Perot Antenna for Ku Band
This paper deals with the design and simulation of a RHCP Fabry-Perot antenna for 14.5 GHz. Based on transmission line model, partially Reflecting Surface (PRS) was designed so thatgain enhancement and circular polarization simultaneously obtained. PRS consist of a square loop and meander-line at the top and bottom respectively. In order to achieve the resonance condition in orthogonal componen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress In Electromagnetics Research C
سال: 2019
ISSN: 1937-8718
DOI: 10.2528/pierc19051703