Circular simple shear extrusion as an alternative for simple shear extrusion technique for producing bulk nanostructured materials
نویسندگان
چکیده
منابع مشابه
Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion
Circular simple shear extrusion process was introduced as a new geometry for simple shear extrusion technique to fabricate ultrafine-grained materials. Similar to the simple shear extrusion method, this process is also based on direct extrusion, and the samples deform in a simple shear manner. In this investigation, the simulations were carried out using the commercial finite element code ABAQU...
متن کاملThe Effect of Simple Shear Extrusion on the Corrosion Behavior of Copper
In this study, corrosion behavior of copper that was deformed by Simple Shear Extrusion (SSE) method was investigated in 3%wt NaCl solution. Modified Williamson-Hall method, applied on the X-ray diffraction patterns of the samples, showed that increase in the number of SSE passes led to increasing in the dislocation density in the copper samples. Moreover, such deformed samples exh...
متن کاملSimple Shear of a Strain-hardening Elastoplastic Hollow Circular Cylinder
Stress and deformation analysis of the simple shear at finite strain of a strainhardening elastoplastic hollow circular cylinder is given. Both isotropic and anisotropic hardening models are considered. In the case of isotropic hardening, there is a closed form analytical solution. No normal stresses exist in this case. Purely kinematic hardening with a Mises-type yield condition is utilized as...
متن کاملNANOSTRUCTURED MATERIALS Progress in hydrostatic extrusion of titanium
At the beginning of the present century it has been demonstrated that nanocrystalline titanium (NC-Ti) can be fabricated by hydrostatic extrusion (HE) which is one of the severe plastic deformation method. NC-Ti obtained in such a way exhibited excellent mechanical properties. The influence of HE on the microstructure and mechanical properties of titanium Grade 2 was first analyzed in 2005. In ...
متن کاملSimple Two Variable Refined Theory for Shear Deformable Isotropic Rectangular Beams
In this paper, a displacement-based, variationally consistent, two variable refined theory for shear deformable beams is presented. The beam is assumed to be of linearly elastic, homogeneous, isotropic material and has a uniform rectangular cross-section. In this theory, the beam axial displacement and beam transverse displacement consist of bending components and shearing components. The assum...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2018
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2018.07.328