Chromium Removal from Tannery Wastewater by Electrocoagulation: Optimization and Sludge Characterization
نویسندگان
چکیده
منابع مشابه
Optimization of organic compounds removal from Wastewater by Electrocoagulation
Introduction: As the most hazardous sewage, hospital wastewater contains various contaminants, and its uncontrolled discharge can seriously damage the environment. Bandar Abbas is located in an arid and semi-arid region therefore, hospital wastewater should be treated through an appropriate and economic method. This study aimed to determine the efficiency of electrocoagulation with aluminum and...
متن کاملContinuous removal of chromium from tannery wastewater using activated sludge process—Determination of kinetic parameters
The activated sludge has been acclimatized with chromium (VI) ions from 5 mg/L to 20 mg/L. It is observed that the chromium removal percentage, COD removal and mixed liquor suspended solid (MLSS) decrease with the increase in dilution rate. Maximum food to microorganisms ratio (F/M) is found to be 0.19. When initial metal ion concentration increases from 5 mg/L to 20 mg/L, the chromium removal ...
متن کاملRemoval of Chromium (VI) in Tannery Wastewater by Bacillus cereus
Bacillus cereus was used to remove Cr(VI) in tannery wastewater containing medium at different initial Cr(VI) concentration, temperature, pH and biomass to get better conditions. At the optimum condition, the Cr(VI) in tannery wastewater was treated by each component of the cells to detect the capacity of the components for the Cr(VI) reduction. Also, the Bacillus cereus was continuous cultured...
متن کاملRemoval of nickel, copper, zinc and chromium from synthetic and industrial wastewater by electrocoagulation
In this work, the performance of electrocoagulation with aluminum electrodes for simultaneous removal of nickel, copper, zinc and chromium from synthetic aqueous aliquot solutions and actual electroplating wastewater was studied. Parameters affecting the electrocoagulation process, such as initial pH, current density, initial metal ion concentration, COD and contact time were investigated. Best...
متن کاملRemoval of Hexavalent Chromium from Electroplating Wastewater by Electrocoagulation with Iron Electrodes
The performance of electrocoagulation using iron electrodes for the removal of hexavalent chromium from synthetic aqueous solutions and actual industrial electroplating wastewater was studied. Parameters affecting the electrocoagulation process, such as initial pH, applied current density, initial metal ion concentration, COD and time of electroprocessing were investigated. The optimum pH was f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Water
سال: 2020
ISSN: 2073-4441
DOI: 10.3390/w12051374