منابع مشابه
Quantitative structure refinement from the ARCS chopper spectrometer
The new wide angular-range chopper spectrometer ARCS at the Spallation Neutron Source at Oak Ridge National Laboratory has been successfully used in whitebeam mode, with no Fermi chopper, to obtain neutron powder diffraction based atomic pair distribution functions (PDFs). Obtained PDF patterns of Si, Ni, and Al2O3 were refined using the PDFfit method and the results compared to data collected ...
متن کاملThe Disk Chopper Spectrometer at NIST: a new instrument for quasielastic neutron scattering studies
We describe the Disk Chopper Spectrometer (DCS) at the NIST Center for Neutron Research (NCNR). The maximum measured flux at the sample, averaged over the 3 cm width and 10 cm height of the beam, with all choppers turning at 20,000 revolutions per minute and phased to transmit neutrons through the widest slots on each disk, is approximately 3 10 n cm 2 s . In this configuration the elastic reso...
متن کاملDesign and operation of the wide angular-range chopper spectrometer ARCS at the Spallation Neutron Source.
The wide angular-range chopper spectrometer ARCS at the Spallation Neutron Source (SNS) is optimized to provide a high neutron flux at the sample position with a large solid angle of detector coverage. The instrument incorporates modern neutron instrumentation, such as an elliptically focused neutron guide, high speed magnetic bearing choppers, and a massive array of (3)He linear position sensi...
متن کاملAtomic pair distribution function analysis from the ARCS chopper spectrometer at the Spallation Neutron Source
Neutron powder diffraction based atomic pair distribution functions (PDFs) are reported from the new wide angular-range chopper spectrometer ARCS at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL). The spectrometer was run in white-beam mode with no Fermi chopper. The PDF patterns of Ni and Al2O3 were refined using the PDFfit method and the results compared to data c...
متن کاملThe new cold neutron chopper spectrometer at the Spallation Neutron Source: design and performance.
The design and performance of the new cold neutron chopper spectrometer (CNCS) at the Spallation Neutron Source in Oak Ridge are described. CNCS is a direct-geometry inelastic time-of-flight spectrometer, designed essentially to cover the same energy and momentum transfer ranges as IN5 at ILL, LET at ISIS, DCS at NIST, TOFTOF at FRM-II, AMATERAS at J-PARC, PHAROS at LANSCE, and NEAT at HZB, at ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: hamon
سال: 2015
ISSN: 1349-046X,1884-636X
DOI: 10.5611/hamon.25.1_52