Chlorination roasting process for extraction of valuable metals in boron clays
نویسندگان
چکیده
منابع مشابه
Recovering Y and Eu from Waste Phosphors Using Chlorination Roasting—Water Leaching Process
Recovering Y and Eu from waste phosphors using chlorination roasting followed by a water leaching process was investigated in this study. Firstly, by chlorination roasting and water leaching, Y and Eu elements present in waste phosphors were efficiently extracted into a leach solution. Secondly, the majority of the impurities in the solution can be removed by adjusting the pH to 4.5 using a Na2...
متن کاملExtraction of Alumina from Local Clays by Hydrochloric Acid Process
A bench work study was carried out to investigate the use of kaolinitic clay containing 29.4% Al2O3 extremely abundant in Saudi Arabia for the production of pure alumina by calcination at 700 o C for 1h (recommended by previous investigators) then leached by hydrochloric acid. The effects of leaching temperature (25 o C to boiling temperature), period of activation (10-150 minutes), acid concen...
متن کاملGold extraction by chlorination using a pyrometallurgical process
The feasibility to recover the gold present in alluvial material, by means of a chlorination process, using chlorine as a reactive agent, has been studied. The influence of temperature and reaction time was studied through changes in the reactant solid. The techniques used to characterize the mineral samples and the reaction residues were stereomicroscopy, X-ray diffraction, X-ray fluorescence ...
متن کاملThe Effect of Chromium on the Roasting Process of Vanadium Extraction
Vanadium is an important metal used almost exclusively in ferrous and non-ferrous alloys due to its physicochemical and mechanical properties such as grain refinement, high tensile strength, hardness and fatigue resistance; it has a wide range of uses in the metallurgical and chemical sectors [1–3]. There are mainly three kinds of raw materials, bone coal, vanadium slag and waste vanadium catal...
متن کاملExtraction of Iron and Manganese from Pyrolusite Absorption Residue by Ammonium Sulphate Roasting–Leaching Process
The residue from desulfurization and denitrification of exhaust gas treatment process with pyrolusite ore as absorbent is regarded as a potential source of iron and manganese. In this study, an extraction process is proposed for recovery of iron and manganese with ammonium sulphate roasting followed by sulphuric acid leaching. Firstly, the conversion mechanism was analyzed through mineral phase...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Pamukkale University Journal of Engineering Sciences
سال: 2020
ISSN: 1300-7009
DOI: 10.5505/pajes.2019.90836