Chitosan A Low Cost Adsorbent for Electroplating Waste Water Treatment

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Sawdust as a natural and low cost adsorbent for the removal of brilliant cresyl blue dye from water samples

Sawdust which is the main waste from wood industry has been used as a raw material forremoval of Brilliant Cresyl Blue toxic dye. The effects of various parameters such as pH,electrolyte concentration, adsorbent dose, contact time and agitation rate were studied for theremoval of the dye in a concentration of 50 mg L-1. The optimum condition for the studiedparameters was applied for various con...

متن کامل

Coal Ash as a Low Cost Adsorbent for the Removal of Xylenol Orange from Aqueous Solution

The removal ofxylenol orange from aqueous solution onto the coal ash was investigated at room temperature. The results show that the adsorption capacity of xylenol orange increased as the adsorption time increased and then equilibrium established after 30 min adsorption time. The results obtained revealed that the coal ash removed about 80 % of xylenol orange from the aqueous solution withi...

متن کامل

Column operation studies for the removal of dyes and phenols using a low cost adsorbent

Fertilizer plant waste carbon slurry has been investigated after some processing as an adsorbent for the removal of dyes and phenols using columns. The results show that the carbonaceous adsorbent prepared from carbon slurry being porous and having appreciable surface area (380 m2/g) can remove dyes both cationic (meldola blue, methylene blue, chrysoidine G, crystal violet) as well a...

متن کامل

peat water treatment using chitosan-silica composite as an adsorbent

the objective of this study is synthesis and characterization of the chitosan-silica composite (csc) and use them as an adsorbent material for peat water treatment. the resulting composite was characterizedby fourier transform infrared (ftir) spectroscopy, scanning electron microscope (sem), x-ray diffraction(xrd), n2 adsorption-desorption isotherm and zeta potential. the sorption experiments w...

متن کامل

Chrome Electroplating Waste BAT

During the past several years, waste produced by the electroplating industry has attracted attention due to the level of pollutants found in the waste stream, the difficulty associated with treatment, and the cost of waste disposal. EPA has enacted regulations to control the discharge from plating facilities and estimates that 140 million lb of metal pollutants will be prevented from being disc...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Bioremediation & Biodegradation

سال: 2016

ISSN: 2155-6199

DOI: 10.4172/2155-6199.1000346