Chemiluminescence of Burner-Stabilized Premixed Laminar Flames
نویسندگان
چکیده
منابع مشابه
Optical Emission Tomography of Non-axisymmetric, Laminar, Premixed Flames
Optical emission tomography of flames has recently been demonstrated as a practical experimental technique for determining the instantaneous position of a 3D flame surface. In this paper, optical emission tomography is applied to steady and forced, non-axisymmetric, premixed, laminar flames. An experimental set-up involving a single camera and a rotatable flame holder allows camera images from ...
متن کاملChemically-Passive Suppression of Laminar Premixed Hydrogen Flames in Microgravity
Effects of chemically-passive fire suppressants on laminar premixed hydrogen flames were investigated by combined use of microgravity experiments and computations. The experiments used a short-drop free-fall laboratory facility that provides at least 450 ms of 2 10 g. Near -limit laminar burning velocities were measured for outwardly propagating spherical stoichiometric hydrogen-air flames with...
متن کاملSimulation of Nitrogen Emissions in a Premixed Hydrogen Flame Stabilized on a Low Swirl Burner
There is considerable interest in developing fuel-flexible, low emissions turbines for power generation. One approach is based on burning a variety of lean premixed fuels with relatively low flame temperatures. Such flames can be stabilized in a low swirl burner configuration, for example, using a variety of fuels such as pure hydrogen and hydrogen-seeded hydrocarbon mixtures. However, many hyd...
متن کاملSimulation of premixed turbulent flames
1. Introduction Premixed turbulent flames are of increasing practical importance and remain a significant research challenge in the combustion community. These flames have the potential to operate cleanly and efficiently over a broad range of fuels, and therefore to represent a key element in the implementation of low-emissions burners for a variety of industrial applications. However, it is di...
متن کاملNumerical Investigation of Forced Ignition in Laminar Counterflow Non- Premixed Methane-air Flames
Simulations of forced ignition of non-premixed laminar counterflow flames are used to study the effect of strain rate on ignition success. A one dimensional calculation is performed, using detailed methane chemical kinetics and treating the spark as an instantaneous heat release in an inert mixing layer. Ignition success depends on the mixture composition at the spark location, resulting in lea...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Combustion Science and Technology
سال: 2019
ISSN: 0010-2202,1563-521X
DOI: 10.1080/00102202.2018.1558391